Workshop Advances in Materials Sciences
portes grátis
Workshop Advances in Materials Sciences
Kovalev, Igor
Trans Tech Publications Ltd
06/2021
264
Mole
Inglês
9783035718515
15 a 20 dias
590
Descrição não disponível.
Preface
Maximum Swelling of the Surface of the Composite Material
Effect of the Biodegradable Compounds Composition with Monoglycerides on Mechanical Properties
Using of AlN Aluminum Matrix Composite in Offshore Wind Turbine
On Durability of Structurally Inhomogeneous Materials
Method of Preparation for Restoration of Worn Nitrided Journals of Crankshafts
Investigation of Nanofiber Material Production by Catalytic Pyrolysis
Dynamics of Strength Gain of an Artificial Stone Based on a Cement Binder
Improvement of the Method for Restoring the Bearing Supports of Steel Crankshaft
Informational Measures of the Shape of the Amoroso Distributions for the Research of Dispersed Materials
Investigation of the SHS Process Initiation in Base Mixture during HFC-Heating and the Combustion Rate Dependence on Various Factors
The Changing of Deformation Properties of Flexo Plates in the Process of Swelling in Solvents
An Effect of Fillers on the Structure and Abrasive Wear of Polyurethane Urea
Fiberglass: Lateral Loads from Climatic and Temporary Factors
Features of the Process of Obtaining Steel 08H14N5M2DL in the Open Induction Furnace IST-0.16
Modelling the Effect of Temperature on the Stability of Bromide and Carbonate Complexes of Europium, Gadolinium, Terbium and Determination of their Thermodynamic Functions
Feasibility of Applying Alkaline-Earth Metal Carboaluminates for Bayer Process Aluminate Solution Purification from Organic Impurities
The Influence of Thermocyclic Treatment on the Structure and Mechanical Properties of Pseudo-Alpha Titanium Alloys for Steam Turbine Blades
Preliminary Local Thermal Impact as a Surface Quality Assurance Factor
The Simulation of Ultra-High Molecular Weight Polyethylene Cryogenic Pipeline Stress-Strain State
Method of Forming Microchannels on the Surface of a Glass Substrate
Arc Technological Characteristics and Metal Transfer Behavior of Twin Electrode GMAW Deposition
Influence of Deformations on the Filtration Coefficient of Materials
Obtaining the Dependences of the Contact of the Composite Abrasive Material with the Nozzle Walls, which Reduces the Wear of the Focusing Tube of the Waterjet Installation
Thermal Processing and Testing for the Heat Blow Materials by Concentrated Flow of Electromagnetic Energy
Size Analysis Based on Sorption Study Data for Hydroxyapatite Nanoparticles
Sensitive Elements of High Temperature Pressure Sensors Formed from a Doped Polycrystalline Diamond
Minimization of Internal Shrinkage Defects in Cast Parts Using 5VA Powder Solder Application
On the Mechanism of Silica Transition into Alumina Solutions in the Leaching of Nepheline Sinters
The Use of Acrylic as a Structural Material in the Design of Translucent Elements of Deep-Submergence Vehicles
Shungite Carbon Nanoparticles as Modifiers of Zns:Cu Phosphor, Based on Analysis of the EPR Spectral Lines of Mn+2
Study of 3D Models of Composite Duck-Foot Tines
Modeling of "Stretching-Over" Static-Dynamic Process
Genotoxic Effect of a New Water-Soluble Fullerene Derivative C70 and its Effect on the Transcriptional Activity of Genes that Regulate the Cell Cycle, DNA Repair and Apoptosis
The Temperature Dependence of the Electrical Conductivity Activation Energy of the of Aqueous Electrolyte Solutions
Change of Rigidity of PCM Modified in an Ultrahigh Frequencies Electromagnetic Field under the Action of External Factors
Influence of the Structure of Iron Coatings on their Physical and Mechanical Properties
Maximum Swelling of the Surface of the Composite Material
Effect of the Biodegradable Compounds Composition with Monoglycerides on Mechanical Properties
Using of AlN Aluminum Matrix Composite in Offshore Wind Turbine
On Durability of Structurally Inhomogeneous Materials
Method of Preparation for Restoration of Worn Nitrided Journals of Crankshafts
Investigation of Nanofiber Material Production by Catalytic Pyrolysis
Dynamics of Strength Gain of an Artificial Stone Based on a Cement Binder
Improvement of the Method for Restoring the Bearing Supports of Steel Crankshaft
Informational Measures of the Shape of the Amoroso Distributions for the Research of Dispersed Materials
Investigation of the SHS Process Initiation in Base Mixture during HFC-Heating and the Combustion Rate Dependence on Various Factors
The Changing of Deformation Properties of Flexo Plates in the Process of Swelling in Solvents
An Effect of Fillers on the Structure and Abrasive Wear of Polyurethane Urea
Fiberglass: Lateral Loads from Climatic and Temporary Factors
Features of the Process of Obtaining Steel 08H14N5M2DL in the Open Induction Furnace IST-0.16
Modelling the Effect of Temperature on the Stability of Bromide and Carbonate Complexes of Europium, Gadolinium, Terbium and Determination of their Thermodynamic Functions
Feasibility of Applying Alkaline-Earth Metal Carboaluminates for Bayer Process Aluminate Solution Purification from Organic Impurities
The Influence of Thermocyclic Treatment on the Structure and Mechanical Properties of Pseudo-Alpha Titanium Alloys for Steam Turbine Blades
Preliminary Local Thermal Impact as a Surface Quality Assurance Factor
The Simulation of Ultra-High Molecular Weight Polyethylene Cryogenic Pipeline Stress-Strain State
Method of Forming Microchannels on the Surface of a Glass Substrate
Arc Technological Characteristics and Metal Transfer Behavior of Twin Electrode GMAW Deposition
Influence of Deformations on the Filtration Coefficient of Materials
Obtaining the Dependences of the Contact of the Composite Abrasive Material with the Nozzle Walls, which Reduces the Wear of the Focusing Tube of the Waterjet Installation
Thermal Processing and Testing for the Heat Blow Materials by Concentrated Flow of Electromagnetic Energy
Size Analysis Based on Sorption Study Data for Hydroxyapatite Nanoparticles
Sensitive Elements of High Temperature Pressure Sensors Formed from a Doped Polycrystalline Diamond
Minimization of Internal Shrinkage Defects in Cast Parts Using 5VA Powder Solder Application
On the Mechanism of Silica Transition into Alumina Solutions in the Leaching of Nepheline Sinters
The Use of Acrylic as a Structural Material in the Design of Translucent Elements of Deep-Submergence Vehicles
Shungite Carbon Nanoparticles as Modifiers of Zns:Cu Phosphor, Based on Analysis of the EPR Spectral Lines of Mn+2
Study of 3D Models of Composite Duck-Foot Tines
Modeling of "Stretching-Over" Static-Dynamic Process
Genotoxic Effect of a New Water-Soluble Fullerene Derivative C70 and its Effect on the Transcriptional Activity of Genes that Regulate the Cell Cycle, DNA Repair and Apoptosis
The Temperature Dependence of the Electrical Conductivity Activation Energy of the of Aqueous Electrolyte Solutions
Change of Rigidity of PCM Modified in an Ultrahigh Frequencies Electromagnetic Field under the Action of External Factors
Influence of the Structure of Iron Coatings on their Physical and Mechanical Properties
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Alloys;Bending Deformation;Carbon Nanomaterials;Corrosion Damage;Covering;Crystallization;Defect;Deformation;Dispersed Materials;Fiberglass;Hardening;Mechanical Processing;Mechanical Properties;Metallurgy;Polymer Composite Materials;Steel;Strength
Preface
Maximum Swelling of the Surface of the Composite Material
Effect of the Biodegradable Compounds Composition with Monoglycerides on Mechanical Properties
Using of AlN Aluminum Matrix Composite in Offshore Wind Turbine
On Durability of Structurally Inhomogeneous Materials
Method of Preparation for Restoration of Worn Nitrided Journals of Crankshafts
Investigation of Nanofiber Material Production by Catalytic Pyrolysis
Dynamics of Strength Gain of an Artificial Stone Based on a Cement Binder
Improvement of the Method for Restoring the Bearing Supports of Steel Crankshaft
Informational Measures of the Shape of the Amoroso Distributions for the Research of Dispersed Materials
Investigation of the SHS Process Initiation in Base Mixture during HFC-Heating and the Combustion Rate Dependence on Various Factors
The Changing of Deformation Properties of Flexo Plates in the Process of Swelling in Solvents
An Effect of Fillers on the Structure and Abrasive Wear of Polyurethane Urea
Fiberglass: Lateral Loads from Climatic and Temporary Factors
Features of the Process of Obtaining Steel 08H14N5M2DL in the Open Induction Furnace IST-0.16
Modelling the Effect of Temperature on the Stability of Bromide and Carbonate Complexes of Europium, Gadolinium, Terbium and Determination of their Thermodynamic Functions
Feasibility of Applying Alkaline-Earth Metal Carboaluminates for Bayer Process Aluminate Solution Purification from Organic Impurities
The Influence of Thermocyclic Treatment on the Structure and Mechanical Properties of Pseudo-Alpha Titanium Alloys for Steam Turbine Blades
Preliminary Local Thermal Impact as a Surface Quality Assurance Factor
The Simulation of Ultra-High Molecular Weight Polyethylene Cryogenic Pipeline Stress-Strain State
Method of Forming Microchannels on the Surface of a Glass Substrate
Arc Technological Characteristics and Metal Transfer Behavior of Twin Electrode GMAW Deposition
Influence of Deformations on the Filtration Coefficient of Materials
Obtaining the Dependences of the Contact of the Composite Abrasive Material with the Nozzle Walls, which Reduces the Wear of the Focusing Tube of the Waterjet Installation
Thermal Processing and Testing for the Heat Blow Materials by Concentrated Flow of Electromagnetic Energy
Size Analysis Based on Sorption Study Data for Hydroxyapatite Nanoparticles
Sensitive Elements of High Temperature Pressure Sensors Formed from a Doped Polycrystalline Diamond
Minimization of Internal Shrinkage Defects in Cast Parts Using 5VA Powder Solder Application
On the Mechanism of Silica Transition into Alumina Solutions in the Leaching of Nepheline Sinters
The Use of Acrylic as a Structural Material in the Design of Translucent Elements of Deep-Submergence Vehicles
Shungite Carbon Nanoparticles as Modifiers of Zns:Cu Phosphor, Based on Analysis of the EPR Spectral Lines of Mn+2
Study of 3D Models of Composite Duck-Foot Tines
Modeling of "Stretching-Over" Static-Dynamic Process
Genotoxic Effect of a New Water-Soluble Fullerene Derivative C70 and its Effect on the Transcriptional Activity of Genes that Regulate the Cell Cycle, DNA Repair and Apoptosis
The Temperature Dependence of the Electrical Conductivity Activation Energy of the of Aqueous Electrolyte Solutions
Change of Rigidity of PCM Modified in an Ultrahigh Frequencies Electromagnetic Field under the Action of External Factors
Influence of the Structure of Iron Coatings on their Physical and Mechanical Properties
Maximum Swelling of the Surface of the Composite Material
Effect of the Biodegradable Compounds Composition with Monoglycerides on Mechanical Properties
Using of AlN Aluminum Matrix Composite in Offshore Wind Turbine
On Durability of Structurally Inhomogeneous Materials
Method of Preparation for Restoration of Worn Nitrided Journals of Crankshafts
Investigation of Nanofiber Material Production by Catalytic Pyrolysis
Dynamics of Strength Gain of an Artificial Stone Based on a Cement Binder
Improvement of the Method for Restoring the Bearing Supports of Steel Crankshaft
Informational Measures of the Shape of the Amoroso Distributions for the Research of Dispersed Materials
Investigation of the SHS Process Initiation in Base Mixture during HFC-Heating and the Combustion Rate Dependence on Various Factors
The Changing of Deformation Properties of Flexo Plates in the Process of Swelling in Solvents
An Effect of Fillers on the Structure and Abrasive Wear of Polyurethane Urea
Fiberglass: Lateral Loads from Climatic and Temporary Factors
Features of the Process of Obtaining Steel 08H14N5M2DL in the Open Induction Furnace IST-0.16
Modelling the Effect of Temperature on the Stability of Bromide and Carbonate Complexes of Europium, Gadolinium, Terbium and Determination of their Thermodynamic Functions
Feasibility of Applying Alkaline-Earth Metal Carboaluminates for Bayer Process Aluminate Solution Purification from Organic Impurities
The Influence of Thermocyclic Treatment on the Structure and Mechanical Properties of Pseudo-Alpha Titanium Alloys for Steam Turbine Blades
Preliminary Local Thermal Impact as a Surface Quality Assurance Factor
The Simulation of Ultra-High Molecular Weight Polyethylene Cryogenic Pipeline Stress-Strain State
Method of Forming Microchannels on the Surface of a Glass Substrate
Arc Technological Characteristics and Metal Transfer Behavior of Twin Electrode GMAW Deposition
Influence of Deformations on the Filtration Coefficient of Materials
Obtaining the Dependences of the Contact of the Composite Abrasive Material with the Nozzle Walls, which Reduces the Wear of the Focusing Tube of the Waterjet Installation
Thermal Processing and Testing for the Heat Blow Materials by Concentrated Flow of Electromagnetic Energy
Size Analysis Based on Sorption Study Data for Hydroxyapatite Nanoparticles
Sensitive Elements of High Temperature Pressure Sensors Formed from a Doped Polycrystalline Diamond
Minimization of Internal Shrinkage Defects in Cast Parts Using 5VA Powder Solder Application
On the Mechanism of Silica Transition into Alumina Solutions in the Leaching of Nepheline Sinters
The Use of Acrylic as a Structural Material in the Design of Translucent Elements of Deep-Submergence Vehicles
Shungite Carbon Nanoparticles as Modifiers of Zns:Cu Phosphor, Based on Analysis of the EPR Spectral Lines of Mn+2
Study of 3D Models of Composite Duck-Foot Tines
Modeling of "Stretching-Over" Static-Dynamic Process
Genotoxic Effect of a New Water-Soluble Fullerene Derivative C70 and its Effect on the Transcriptional Activity of Genes that Regulate the Cell Cycle, DNA Repair and Apoptosis
The Temperature Dependence of the Electrical Conductivity Activation Energy of the of Aqueous Electrolyte Solutions
Change of Rigidity of PCM Modified in an Ultrahigh Frequencies Electromagnetic Field under the Action of External Factors
Influence of the Structure of Iron Coatings on their Physical and Mechanical Properties
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
