Processing and Application of Engineering Materials
portes grátis
Processing and Application of Engineering Materials
Castanie, Bruno; Thillikkani, Shanmugam; Agarwal, Ramesh K.; Kale, Sandip A.
Trans Tech Publications Ltd
05/2024
184
Mole
9783036401034
15 a 20 dias
Descrição não disponível.
Preface
Chapter 1: Machining Technologies and Properties of Structural Metals
Optimization of Titanium Alloy-Ti-6Al-4V to Minimize Mass, Maximize Stiffness and Frequency in Additive Manufacturing
Modeling and Simulation of Friction Stir Welding of Aluminum and Magnesium Alloys Using Finite Element Analysis
Chapter 2: Materials for Sensor Engineering
Crystallinity Study of Electrodeposited SnO2 on FTO Substrate
DFT + U +V Investigation on Adsorption of Gas Molecules (CO, SO2, NO, and NO2) on Ni Doped Bismuth Ferrite Oxide (010)
Poly(O-Phenylene Diamine) Reformed Pencil Graphite as the Disposable Electrochemical Sensor for Voltammetric Analysis of Tryptamine
Chapter 3: Functional Materials
Thermoelectric Properties of Spray Coated n-Type PEDOT:PSS Film
Synthesis and Fabrication of Luminescence of CsPbBr3/PAN Nanocomposite Fiber
Chapter 4: Materials and Technologies to Ensure Ecological Safety
Evaluation of Recycled Polypropylene (PP) Made from Plastic Cups as Filaments for Additive Manufacturing
Synthesis, Characterization, and Utilization of Water Hyacinth (Eichhornia crassipes) Magnetic Biochar for Nitrate Removal from Simulated Wastewater
Morphological and Physico-Chemical Characterization of Soils from Gold Panning in Komabangou, Niger
Chapter 5: Green Building Materials
Mitigation of Efflorescence and Alkali Leaching in Activated Slag Using Foundry Sand
Synthesis of Acid-Based Fly Ash Geopolymer with Pure Phosphoric Acid Compare with P-Leachate Activator
Comparative Analysis of Local Materials Effects on Two Buildings Thermal Behaviours in Sahelian Climate
Chapter 6: Wood in Construction
Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills
Signal Processing Technique to Study the Propagation Modes of Ultrasonic Waves in Wood Protected by Layers of Liquid Paint (Cement)
Experimental and Numerical Study of the Physico-Hygrothermal Behavior of Two Tropical Wood Species
Estimating Wood Specific Gravity of Ravenala madagascariensis Sonn. Using Near-Infrared Spectroscopy
Chapter 1: Machining Technologies and Properties of Structural Metals
Optimization of Titanium Alloy-Ti-6Al-4V to Minimize Mass, Maximize Stiffness and Frequency in Additive Manufacturing
Modeling and Simulation of Friction Stir Welding of Aluminum and Magnesium Alloys Using Finite Element Analysis
Chapter 2: Materials for Sensor Engineering
Crystallinity Study of Electrodeposited SnO2 on FTO Substrate
DFT + U +V Investigation on Adsorption of Gas Molecules (CO, SO2, NO, and NO2) on Ni Doped Bismuth Ferrite Oxide (010)
Poly(O-Phenylene Diamine) Reformed Pencil Graphite as the Disposable Electrochemical Sensor for Voltammetric Analysis of Tryptamine
Chapter 3: Functional Materials
Thermoelectric Properties of Spray Coated n-Type PEDOT:PSS Film
Synthesis and Fabrication of Luminescence of CsPbBr3/PAN Nanocomposite Fiber
Chapter 4: Materials and Technologies to Ensure Ecological Safety
Evaluation of Recycled Polypropylene (PP) Made from Plastic Cups as Filaments for Additive Manufacturing
Synthesis, Characterization, and Utilization of Water Hyacinth (Eichhornia crassipes) Magnetic Biochar for Nitrate Removal from Simulated Wastewater
Morphological and Physico-Chemical Characterization of Soils from Gold Panning in Komabangou, Niger
Chapter 5: Green Building Materials
Mitigation of Efflorescence and Alkali Leaching in Activated Slag Using Foundry Sand
Synthesis of Acid-Based Fly Ash Geopolymer with Pure Phosphoric Acid Compare with P-Leachate Activator
Comparative Analysis of Local Materials Effects on Two Buildings Thermal Behaviours in Sahelian Climate
Chapter 6: Wood in Construction
Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills
Signal Processing Technique to Study the Propagation Modes of Ultrasonic Waves in Wood Protected by Layers of Liquid Paint (Cement)
Experimental and Numerical Study of the Physico-Hygrothermal Behavior of Two Tropical Wood Species
Estimating Wood Specific Gravity of Ravenala madagascariensis Sonn. Using Near-Infrared Spectroscopy
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Absorption;Additive Manufacturing;Alloy;Foundry Sand;Friction Stir Welding;Gas Sensor;Green Building Materials;Luminescence;Mechanical Properties;Nanocomposite;Polluted Soil ;Semiconductor;Thermoelectric Properties;Thin Film;Waste Recycling
Preface
Chapter 1: Machining Technologies and Properties of Structural Metals
Optimization of Titanium Alloy-Ti-6Al-4V to Minimize Mass, Maximize Stiffness and Frequency in Additive Manufacturing
Modeling and Simulation of Friction Stir Welding of Aluminum and Magnesium Alloys Using Finite Element Analysis
Chapter 2: Materials for Sensor Engineering
Crystallinity Study of Electrodeposited SnO2 on FTO Substrate
DFT + U +V Investigation on Adsorption of Gas Molecules (CO, SO2, NO, and NO2) on Ni Doped Bismuth Ferrite Oxide (010)
Poly(O-Phenylene Diamine) Reformed Pencil Graphite as the Disposable Electrochemical Sensor for Voltammetric Analysis of Tryptamine
Chapter 3: Functional Materials
Thermoelectric Properties of Spray Coated n-Type PEDOT:PSS Film
Synthesis and Fabrication of Luminescence of CsPbBr3/PAN Nanocomposite Fiber
Chapter 4: Materials and Technologies to Ensure Ecological Safety
Evaluation of Recycled Polypropylene (PP) Made from Plastic Cups as Filaments for Additive Manufacturing
Synthesis, Characterization, and Utilization of Water Hyacinth (Eichhornia crassipes) Magnetic Biochar for Nitrate Removal from Simulated Wastewater
Morphological and Physico-Chemical Characterization of Soils from Gold Panning in Komabangou, Niger
Chapter 5: Green Building Materials
Mitigation of Efflorescence and Alkali Leaching in Activated Slag Using Foundry Sand
Synthesis of Acid-Based Fly Ash Geopolymer with Pure Phosphoric Acid Compare with P-Leachate Activator
Comparative Analysis of Local Materials Effects on Two Buildings Thermal Behaviours in Sahelian Climate
Chapter 6: Wood in Construction
Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills
Signal Processing Technique to Study the Propagation Modes of Ultrasonic Waves in Wood Protected by Layers of Liquid Paint (Cement)
Experimental and Numerical Study of the Physico-Hygrothermal Behavior of Two Tropical Wood Species
Estimating Wood Specific Gravity of Ravenala madagascariensis Sonn. Using Near-Infrared Spectroscopy
Chapter 1: Machining Technologies and Properties of Structural Metals
Optimization of Titanium Alloy-Ti-6Al-4V to Minimize Mass, Maximize Stiffness and Frequency in Additive Manufacturing
Modeling and Simulation of Friction Stir Welding of Aluminum and Magnesium Alloys Using Finite Element Analysis
Chapter 2: Materials for Sensor Engineering
Crystallinity Study of Electrodeposited SnO2 on FTO Substrate
DFT + U +V Investigation on Adsorption of Gas Molecules (CO, SO2, NO, and NO2) on Ni Doped Bismuth Ferrite Oxide (010)
Poly(O-Phenylene Diamine) Reformed Pencil Graphite as the Disposable Electrochemical Sensor for Voltammetric Analysis of Tryptamine
Chapter 3: Functional Materials
Thermoelectric Properties of Spray Coated n-Type PEDOT:PSS Film
Synthesis and Fabrication of Luminescence of CsPbBr3/PAN Nanocomposite Fiber
Chapter 4: Materials and Technologies to Ensure Ecological Safety
Evaluation of Recycled Polypropylene (PP) Made from Plastic Cups as Filaments for Additive Manufacturing
Synthesis, Characterization, and Utilization of Water Hyacinth (Eichhornia crassipes) Magnetic Biochar for Nitrate Removal from Simulated Wastewater
Morphological and Physico-Chemical Characterization of Soils from Gold Panning in Komabangou, Niger
Chapter 5: Green Building Materials
Mitigation of Efflorescence and Alkali Leaching in Activated Slag Using Foundry Sand
Synthesis of Acid-Based Fly Ash Geopolymer with Pure Phosphoric Acid Compare with P-Leachate Activator
Comparative Analysis of Local Materials Effects on Two Buildings Thermal Behaviours in Sahelian Climate
Chapter 6: Wood in Construction
Development and Characterization of a Micro-Concrete Based on Wood Waste from Sawmills
Signal Processing Technique to Study the Propagation Modes of Ultrasonic Waves in Wood Protected by Layers of Liquid Paint (Cement)
Experimental and Numerical Study of the Physico-Hygrothermal Behavior of Two Tropical Wood Species
Estimating Wood Specific Gravity of Ravenala madagascariensis Sonn. Using Near-Infrared Spectroscopy
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
