Advanced Materials Science III
portes grátis
Advanced Materials Science III
Sarjito; Besar Riyadi, Tri Widodo; Siswanto, Waluyo Adi
Trans Tech Publications Ltd
06/2021
218
Mole
Inglês
9783035718720
15 a 20 dias
510
Descrição não disponível.
Preface
Chapter 1: Properties and Processing Technologies of Steel and Alloys
Effect of Al Additions on the Microstructure and Mechanical Properties of the SHS Product of Ni-Al-TiO2 Mixtures
Influence of Artificial Aging in Aluminum Silicon Alloy
The Effect of Smaw Welding Currents on Mechanical Properties and Micro Structures of Low Carbon Steels
Effect of Hardening and Tempering on the Microstructure and Mechanical Properties of the Tapered-Forged Leaf Spring Steel
Increased Hardness and Wear Resistance of Commercially Pure Titanium by a Plasma Nitrocarburizing
Effect of Nickel Addition on the Microstructure and Toughness of Shielded Metal Arc Welded SS400 Steel
Chapter 2: Composites
The Effect of Copper Particles Size on Hardness, Wear Resistance and Friction Coefficient of Fiberglass-Carbon Particles-Copper Particles Reinforced Composite
Enhancement for Mechanical Properties of Green Composites Using Treated Yellow Bamboo
Analysis of the Morphology and Mechanical Properties of Polymer Composite Materials (PCM) from Silicon Dioxide (SiO2) and Multiwalled Carbon Nanotubes (MWNTs) Reinforced Volcanic Stone
Fabrication of Acoustic Panel from Composites of Coconut Husk Waste Powder and Styrofoam Resin and its Sound Absorption Performance
Chapter 3: Materials and Technologies in Construction
Evaluation of Compressive Strength of Sustainable Concrete Using Genetic Algorithm Assisted Artificial Neural Networks
Artificial Neural Network Approach for Modelling Modified Zeolite Adsorption
Particle Size and Microstructure Characterization of Uncontrolled Burning Rice Husk Ash (RHA) as Pozzolanic Material
Evaluation of Optimal Substitute Ratio of Fly Ash Based on Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sensitivity Study
Effects of Curing Time to Engineering Properties of Alkaline Activated Materials Synthesized from Thu Duc Water Plant Waste Sludge, Fly Ash, and Geopolymer Aggregate
A Review of Nanomaterial Mixtures on Asphalt Pavement Application
Chapter 4: Materials for Biosensing
The Quality Optimization of SiO2/Graphene Material as Sensing Layer for Escherichia coli Bacteria Sensor Application
Allylamine-Conjugated Polyacrylic Acid and Gold Nanoparticles for Colorimetric Detection of Bacteria
Chapter 5: Materials and Technologies in Chemical Production and Environmental Engineering
Synthesis Dimethyl Ether from Methanol Using Red Mud Catalyst
Production Biofuels from Palm Empty Fruit Bunch by Catalytic Pyrolysis Using Calcined Dolomite
Effect of pH and Contact Time on the Adsorption of Pb(II) by Kapok Wood (Ceiba pentandra) Sawdust Based Biosorbent
Preparation of Synthetic ?-Wollastonite Produced from Amorphous SiO2 Bamboo Leaf Ash and Meretix meretix Shell
Improvement High Purity Biogenic Amorphous SiO2 Derived from Rice Husk Ash: Synthesis and its Characterization
Characterization and Reduction Behavior of Carbonized Ore Prepared by Iron Ore Immersion in Tar Derived from Biomass Pyrolysis
The Effect of Water Content on Particle Characterization of Bamboo Charcoal Resulted from Ball Milling
Cesium Tungstophosphoric Acid Supported on Fly Ash: The Solid Catalyst for Esterification of Eugenol with Acetic Acid
Chapter 1: Properties and Processing Technologies of Steel and Alloys
Effect of Al Additions on the Microstructure and Mechanical Properties of the SHS Product of Ni-Al-TiO2 Mixtures
Influence of Artificial Aging in Aluminum Silicon Alloy
The Effect of Smaw Welding Currents on Mechanical Properties and Micro Structures of Low Carbon Steels
Effect of Hardening and Tempering on the Microstructure and Mechanical Properties of the Tapered-Forged Leaf Spring Steel
Increased Hardness and Wear Resistance of Commercially Pure Titanium by a Plasma Nitrocarburizing
Effect of Nickel Addition on the Microstructure and Toughness of Shielded Metal Arc Welded SS400 Steel
Chapter 2: Composites
The Effect of Copper Particles Size on Hardness, Wear Resistance and Friction Coefficient of Fiberglass-Carbon Particles-Copper Particles Reinforced Composite
Enhancement for Mechanical Properties of Green Composites Using Treated Yellow Bamboo
Analysis of the Morphology and Mechanical Properties of Polymer Composite Materials (PCM) from Silicon Dioxide (SiO2) and Multiwalled Carbon Nanotubes (MWNTs) Reinforced Volcanic Stone
Fabrication of Acoustic Panel from Composites of Coconut Husk Waste Powder and Styrofoam Resin and its Sound Absorption Performance
Chapter 3: Materials and Technologies in Construction
Evaluation of Compressive Strength of Sustainable Concrete Using Genetic Algorithm Assisted Artificial Neural Networks
Artificial Neural Network Approach for Modelling Modified Zeolite Adsorption
Particle Size and Microstructure Characterization of Uncontrolled Burning Rice Husk Ash (RHA) as Pozzolanic Material
Evaluation of Optimal Substitute Ratio of Fly Ash Based on Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sensitivity Study
Effects of Curing Time to Engineering Properties of Alkaline Activated Materials Synthesized from Thu Duc Water Plant Waste Sludge, Fly Ash, and Geopolymer Aggregate
A Review of Nanomaterial Mixtures on Asphalt Pavement Application
Chapter 4: Materials for Biosensing
The Quality Optimization of SiO2/Graphene Material as Sensing Layer for Escherichia coli Bacteria Sensor Application
Allylamine-Conjugated Polyacrylic Acid and Gold Nanoparticles for Colorimetric Detection of Bacteria
Chapter 5: Materials and Technologies in Chemical Production and Environmental Engineering
Synthesis Dimethyl Ether from Methanol Using Red Mud Catalyst
Production Biofuels from Palm Empty Fruit Bunch by Catalytic Pyrolysis Using Calcined Dolomite
Effect of pH and Contact Time on the Adsorption of Pb(II) by Kapok Wood (Ceiba pentandra) Sawdust Based Biosorbent
Preparation of Synthetic ?-Wollastonite Produced from Amorphous SiO2 Bamboo Leaf Ash and Meretix meretix Shell
Improvement High Purity Biogenic Amorphous SiO2 Derived from Rice Husk Ash: Synthesis and its Characterization
Characterization and Reduction Behavior of Carbonized Ore Prepared by Iron Ore Immersion in Tar Derived from Biomass Pyrolysis
The Effect of Water Content on Particle Characterization of Bamboo Charcoal Resulted from Ball Milling
Cesium Tungstophosphoric Acid Supported on Fly Ash: The Solid Catalyst for Esterification of Eugenol with Acetic Acid
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Alloy;Biofuel;Biotechnology;Building Materials;Catalysis;Chemical Technology;Composite;Mechanical Properties;Nanomaterials;Polymer;Processing Technology;Pyrolysis;Steel;Waste Recycling;Welding
Preface
Chapter 1: Properties and Processing Technologies of Steel and Alloys
Effect of Al Additions on the Microstructure and Mechanical Properties of the SHS Product of Ni-Al-TiO2 Mixtures
Influence of Artificial Aging in Aluminum Silicon Alloy
The Effect of Smaw Welding Currents on Mechanical Properties and Micro Structures of Low Carbon Steels
Effect of Hardening and Tempering on the Microstructure and Mechanical Properties of the Tapered-Forged Leaf Spring Steel
Increased Hardness and Wear Resistance of Commercially Pure Titanium by a Plasma Nitrocarburizing
Effect of Nickel Addition on the Microstructure and Toughness of Shielded Metal Arc Welded SS400 Steel
Chapter 2: Composites
The Effect of Copper Particles Size on Hardness, Wear Resistance and Friction Coefficient of Fiberglass-Carbon Particles-Copper Particles Reinforced Composite
Enhancement for Mechanical Properties of Green Composites Using Treated Yellow Bamboo
Analysis of the Morphology and Mechanical Properties of Polymer Composite Materials (PCM) from Silicon Dioxide (SiO2) and Multiwalled Carbon Nanotubes (MWNTs) Reinforced Volcanic Stone
Fabrication of Acoustic Panel from Composites of Coconut Husk Waste Powder and Styrofoam Resin and its Sound Absorption Performance
Chapter 3: Materials and Technologies in Construction
Evaluation of Compressive Strength of Sustainable Concrete Using Genetic Algorithm Assisted Artificial Neural Networks
Artificial Neural Network Approach for Modelling Modified Zeolite Adsorption
Particle Size and Microstructure Characterization of Uncontrolled Burning Rice Husk Ash (RHA) as Pozzolanic Material
Evaluation of Optimal Substitute Ratio of Fly Ash Based on Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sensitivity Study
Effects of Curing Time to Engineering Properties of Alkaline Activated Materials Synthesized from Thu Duc Water Plant Waste Sludge, Fly Ash, and Geopolymer Aggregate
A Review of Nanomaterial Mixtures on Asphalt Pavement Application
Chapter 4: Materials for Biosensing
The Quality Optimization of SiO2/Graphene Material as Sensing Layer for Escherichia coli Bacteria Sensor Application
Allylamine-Conjugated Polyacrylic Acid and Gold Nanoparticles for Colorimetric Detection of Bacteria
Chapter 5: Materials and Technologies in Chemical Production and Environmental Engineering
Synthesis Dimethyl Ether from Methanol Using Red Mud Catalyst
Production Biofuels from Palm Empty Fruit Bunch by Catalytic Pyrolysis Using Calcined Dolomite
Effect of pH and Contact Time on the Adsorption of Pb(II) by Kapok Wood (Ceiba pentandra) Sawdust Based Biosorbent
Preparation of Synthetic ?-Wollastonite Produced from Amorphous SiO2 Bamboo Leaf Ash and Meretix meretix Shell
Improvement High Purity Biogenic Amorphous SiO2 Derived from Rice Husk Ash: Synthesis and its Characterization
Characterization and Reduction Behavior of Carbonized Ore Prepared by Iron Ore Immersion in Tar Derived from Biomass Pyrolysis
The Effect of Water Content on Particle Characterization of Bamboo Charcoal Resulted from Ball Milling
Cesium Tungstophosphoric Acid Supported on Fly Ash: The Solid Catalyst for Esterification of Eugenol with Acetic Acid
Chapter 1: Properties and Processing Technologies of Steel and Alloys
Effect of Al Additions on the Microstructure and Mechanical Properties of the SHS Product of Ni-Al-TiO2 Mixtures
Influence of Artificial Aging in Aluminum Silicon Alloy
The Effect of Smaw Welding Currents on Mechanical Properties and Micro Structures of Low Carbon Steels
Effect of Hardening and Tempering on the Microstructure and Mechanical Properties of the Tapered-Forged Leaf Spring Steel
Increased Hardness and Wear Resistance of Commercially Pure Titanium by a Plasma Nitrocarburizing
Effect of Nickel Addition on the Microstructure and Toughness of Shielded Metal Arc Welded SS400 Steel
Chapter 2: Composites
The Effect of Copper Particles Size on Hardness, Wear Resistance and Friction Coefficient of Fiberglass-Carbon Particles-Copper Particles Reinforced Composite
Enhancement for Mechanical Properties of Green Composites Using Treated Yellow Bamboo
Analysis of the Morphology and Mechanical Properties of Polymer Composite Materials (PCM) from Silicon Dioxide (SiO2) and Multiwalled Carbon Nanotubes (MWNTs) Reinforced Volcanic Stone
Fabrication of Acoustic Panel from Composites of Coconut Husk Waste Powder and Styrofoam Resin and its Sound Absorption Performance
Chapter 3: Materials and Technologies in Construction
Evaluation of Compressive Strength of Sustainable Concrete Using Genetic Algorithm Assisted Artificial Neural Networks
Artificial Neural Network Approach for Modelling Modified Zeolite Adsorption
Particle Size and Microstructure Characterization of Uncontrolled Burning Rice Husk Ash (RHA) as Pozzolanic Material
Evaluation of Optimal Substitute Ratio of Fly Ash Based on Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sensitivity Study
Effects of Curing Time to Engineering Properties of Alkaline Activated Materials Synthesized from Thu Duc Water Plant Waste Sludge, Fly Ash, and Geopolymer Aggregate
A Review of Nanomaterial Mixtures on Asphalt Pavement Application
Chapter 4: Materials for Biosensing
The Quality Optimization of SiO2/Graphene Material as Sensing Layer for Escherichia coli Bacteria Sensor Application
Allylamine-Conjugated Polyacrylic Acid and Gold Nanoparticles for Colorimetric Detection of Bacteria
Chapter 5: Materials and Technologies in Chemical Production and Environmental Engineering
Synthesis Dimethyl Ether from Methanol Using Red Mud Catalyst
Production Biofuels from Palm Empty Fruit Bunch by Catalytic Pyrolysis Using Calcined Dolomite
Effect of pH and Contact Time on the Adsorption of Pb(II) by Kapok Wood (Ceiba pentandra) Sawdust Based Biosorbent
Preparation of Synthetic ?-Wollastonite Produced from Amorphous SiO2 Bamboo Leaf Ash and Meretix meretix Shell
Improvement High Purity Biogenic Amorphous SiO2 Derived from Rice Husk Ash: Synthesis and its Characterization
Characterization and Reduction Behavior of Carbonized Ore Prepared by Iron Ore Immersion in Tar Derived from Biomass Pyrolysis
The Effect of Water Content on Particle Characterization of Bamboo Charcoal Resulted from Ball Milling
Cesium Tungstophosphoric Acid Supported on Fly Ash: The Solid Catalyst for Esterification of Eugenol with Acetic Acid
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
