Material Science and Engineering Technology X
portes grátis
Material Science and Engineering Technology X
Mendonca, Paulo; Chastre, Carlos; Agarwal, Ramesh K.
Trans Tech Publications Ltd
03/2022
446
Mole
Inglês
9783035726848
15 a 20 dias
890
Descrição não disponível.
Preface
Chapter 1: Polymers and Composites
Long and Short Human Hair Fiber-Reinforced Polymer Composites: Mechanical Properties for Engineering Applications
Study of the Mechanical Properties of Polymer Composites Based on Polyolefins with the Addition of Rice Husk and Compatibilizer
Assessment on the Potential Application of Salago Fiber Composite as an Alternative Material in Drone Airframe
Enhancement of Mechanical Properties of Carbon Nanotube Reinforced Al Composites Fabricated by Spark Plasma Sintering Using Hot Rolling Techniques
Fabrication and Mechanical Evaluation of Pressed Wood Powder Compounds Reinforced with Alpaca Wool and Ichu
Mechanical, Thermal and Morphological Properties of Poly(Lactic Acid) and Poly(Butylene Adipate-co-Terephthalate) Blends with Organoclay
Modelling the Toughness of Nanostructured Polyhedral Oligomeric Silsesquioxane Composites Fabricated by Stereolithography 3D Printing: A Response Surface Methodology and Artificial Neural Network Approach
Property Improvement of Recycled Nylon 6 by Thermoplastic Poly(Ether-Ester) Elastomer and Wollastonite
Chapter 2: Materials Physics and Computational Materials Science
Magneto-Transport Properties and Hole Self-Doping due to Excess Oxygen Addition in Polycrystalline LaMnO3
Thermal Conduction: Computational Model and Engineering Applications
First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy
Machine Learning Enabled Prediction of Electromagnetic Interference Shielding Effectiveness of Poly(Vinylidene Fluoride)/Mxene Nanocomposites
Chapter 3: Functional Materials
Tailoring the Everolimus Immobilisation Time on Poly(L-Lactic Acid/ Poly(D-Lactic Acid) Scaffold for Biodegradable Stent Coating Development
Self-Healing of Epoxy-Loaded Halloysite Nanotubes/Polysulfone Nanocomposite Membrane
Poly(L-Lactide) Membrane as an Elastic Membrane to Support Cardiac Bleeding Intervention
Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials
Characterization of the Properties of Chitosan Nanoparticles (CSNPs)/PEO Nanofibrous Membranes
Chapter 5: Materials and Technologies for Microelectronics and Energy Saving and Energy Conversion Devices
Novel Gel-Polymer Electrolytes for Sodium-Ion Secondary Batteries - An Electrochemical Impedance Spectroscopic Studies
Supercapacitive Performance of Electrochemically Synthesized Samarium Cobalt Oxide Nanosheets and Nanoflowers
Enhance Growth Temperature ZnO Nr Photoanode DSSC for Performance of Photo-Supercapacitor via Hydrothermal
Comparative Parametric Analysis of Class-B Power Amplifier Using BJT, Single-Gate MOSFET, and Double-Gate MOSFET
Investigation on the Structural and Electrical Properties of ZnO Thin Films Co-Doped with Rare Earth Gd and Al Prepared by Co-Sputtering Method
Fabrication of Aluminum Nickel Reactive Bilayer by the Lift-Off Process
Chapter 4: Materials Chemistry and Chemical Engineering
Thermally Conductive Cellulose/Coper Composite Rods for Tailoring the Characteristics of Cigarettes
Development of Catalysts for Synthesizing Methanol from Syngas
Free Fatty Acid Reduction of Palm Oil Mill Effluent (POME) Using Heterogeneous Acid Catalyst for Esterification
Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method
Chapter 6: Structural Metals and Alloys, Processing Technologies
Welding Parameter Optimization for Improvement of Mechanical Strength of Weld Line
Interference Phenomena on Infrared Thermography during a Mushy Solidification Zone
Hybrid Products from Laser Powder Bed Fusion Manufactured Inconel 718 and 316L Utilizing Laser Welding
Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove
A Polynomial Equation Model for Fatigue Crack Propagation in an Aeronautical Steel Material
The Damping Effect of Particle-Filled Hollow Sphere Structures and their Application in Machine Tool Components
Importance of Finite Element Analysis for Verification of Technological Parameters of Seamless Tubes Production Obtained by Experiment
Influence of Air Gap Size to Mechanical Properties of Laser Welded Lap Joints
Study on the Preparation and Characteristics of Copper-Chromium Alloy Cladding Layer
Environmental Damage Behavior of 2A12 Aluminum Alloy under Coupling Action of Marine Atmospheric Environment and Tensile-Compressive Load
A FEM Analysis on the Influence of Manganese on Carbon and Chromium Macrosegregation in Large Size Steel Ingot
FEM Simulation of the Effect of Mold Initial Temperature on Carbon Macrosegregation in Large-Size Steel Ingots
Chapter 7: Building Materials and Structural Units
Effect of Local Coarse Aggregates on the Compressive Strength of High Strength Concrete
New-and-Old Concrete Interface Shearing Strength Test and Shear Slip Behavior Analysis
Effects of the End-Zone Reinforcements and Strand-Debonding on the Temporal Changes of Principal Stresses at the Ends of the Hollow PC-Girders
The Degradation of Reinforced Concrete Bridge Elements
Determination of Material Design Values for Steel Fibre Reinforced Self-Stressing Concrete (SFRSSC) and Regular Steel Fibre Reinforced Concrete (SFRC) in Statically Indeterminate Round Panel Tests
Concrete Sustainable Buildings Using Domestic Wastewater Treated
Preliminary Investigation of Geopolymer Mixture Using GGBFS and Off-ASTM Class F Fly Ash
Effect of Thermal Stimulation of Superplasticizer on Basic Properties of Mortar
Influence of Eggshell Powder as Cementitious Blends in Cement Mortar
Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material
A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition
The Study on Blast Furnace Slag on Different Conditions as Curing Condition and Blaine Value Ratio Influence Improving Strength Performance
Development of 100% Recycled Thermoplastic Composites for Sound Insulated Acoustic Panels
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (I): Meteorological Parameters
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (II): Material Parameters
Fabrication and Mechanical Behavior of Portland Cement Mortars Reinforced with Ichu Fibers
The Study Influence of Sugarcane Leaves Fibers Ratio on Compressive Strength of Fire Clay Bricks
Acetic Acid Modified Steel Slag via Dry Chemical Modification Method for Enhancing the Hydraulic Reactivity
Chapter 8: Waste Recycling and Degradation
Visible Light Photocatalytic Degradation of Methylene Blue Using Polypyrrole-Coated Molybdenum-Based Magnetic Photocatalyst
Valorization of Cotton Wastes for Production of Cellulose Nanocrystals
Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste
Microwave-Assisted Conversion of Waste Coffee Grounds to Turbostratic Carbon
Chapter 1: Polymers and Composites
Long and Short Human Hair Fiber-Reinforced Polymer Composites: Mechanical Properties for Engineering Applications
Study of the Mechanical Properties of Polymer Composites Based on Polyolefins with the Addition of Rice Husk and Compatibilizer
Assessment on the Potential Application of Salago Fiber Composite as an Alternative Material in Drone Airframe
Enhancement of Mechanical Properties of Carbon Nanotube Reinforced Al Composites Fabricated by Spark Plasma Sintering Using Hot Rolling Techniques
Fabrication and Mechanical Evaluation of Pressed Wood Powder Compounds Reinforced with Alpaca Wool and Ichu
Mechanical, Thermal and Morphological Properties of Poly(Lactic Acid) and Poly(Butylene Adipate-co-Terephthalate) Blends with Organoclay
Modelling the Toughness of Nanostructured Polyhedral Oligomeric Silsesquioxane Composites Fabricated by Stereolithography 3D Printing: A Response Surface Methodology and Artificial Neural Network Approach
Property Improvement of Recycled Nylon 6 by Thermoplastic Poly(Ether-Ester) Elastomer and Wollastonite
Chapter 2: Materials Physics and Computational Materials Science
Magneto-Transport Properties and Hole Self-Doping due to Excess Oxygen Addition in Polycrystalline LaMnO3
Thermal Conduction: Computational Model and Engineering Applications
First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy
Machine Learning Enabled Prediction of Electromagnetic Interference Shielding Effectiveness of Poly(Vinylidene Fluoride)/Mxene Nanocomposites
Chapter 3: Functional Materials
Tailoring the Everolimus Immobilisation Time on Poly(L-Lactic Acid/ Poly(D-Lactic Acid) Scaffold for Biodegradable Stent Coating Development
Self-Healing of Epoxy-Loaded Halloysite Nanotubes/Polysulfone Nanocomposite Membrane
Poly(L-Lactide) Membrane as an Elastic Membrane to Support Cardiac Bleeding Intervention
Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials
Characterization of the Properties of Chitosan Nanoparticles (CSNPs)/PEO Nanofibrous Membranes
Chapter 5: Materials and Technologies for Microelectronics and Energy Saving and Energy Conversion Devices
Novel Gel-Polymer Electrolytes for Sodium-Ion Secondary Batteries - An Electrochemical Impedance Spectroscopic Studies
Supercapacitive Performance of Electrochemically Synthesized Samarium Cobalt Oxide Nanosheets and Nanoflowers
Enhance Growth Temperature ZnO Nr Photoanode DSSC for Performance of Photo-Supercapacitor via Hydrothermal
Comparative Parametric Analysis of Class-B Power Amplifier Using BJT, Single-Gate MOSFET, and Double-Gate MOSFET
Investigation on the Structural and Electrical Properties of ZnO Thin Films Co-Doped with Rare Earth Gd and Al Prepared by Co-Sputtering Method
Fabrication of Aluminum Nickel Reactive Bilayer by the Lift-Off Process
Chapter 4: Materials Chemistry and Chemical Engineering
Thermally Conductive Cellulose/Coper Composite Rods for Tailoring the Characteristics of Cigarettes
Development of Catalysts for Synthesizing Methanol from Syngas
Free Fatty Acid Reduction of Palm Oil Mill Effluent (POME) Using Heterogeneous Acid Catalyst for Esterification
Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method
Chapter 6: Structural Metals and Alloys, Processing Technologies
Welding Parameter Optimization for Improvement of Mechanical Strength of Weld Line
Interference Phenomena on Infrared Thermography during a Mushy Solidification Zone
Hybrid Products from Laser Powder Bed Fusion Manufactured Inconel 718 and 316L Utilizing Laser Welding
Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove
A Polynomial Equation Model for Fatigue Crack Propagation in an Aeronautical Steel Material
The Damping Effect of Particle-Filled Hollow Sphere Structures and their Application in Machine Tool Components
Importance of Finite Element Analysis for Verification of Technological Parameters of Seamless Tubes Production Obtained by Experiment
Influence of Air Gap Size to Mechanical Properties of Laser Welded Lap Joints
Study on the Preparation and Characteristics of Copper-Chromium Alloy Cladding Layer
Environmental Damage Behavior of 2A12 Aluminum Alloy under Coupling Action of Marine Atmospheric Environment and Tensile-Compressive Load
A FEM Analysis on the Influence of Manganese on Carbon and Chromium Macrosegregation in Large Size Steel Ingot
FEM Simulation of the Effect of Mold Initial Temperature on Carbon Macrosegregation in Large-Size Steel Ingots
Chapter 7: Building Materials and Structural Units
Effect of Local Coarse Aggregates on the Compressive Strength of High Strength Concrete
New-and-Old Concrete Interface Shearing Strength Test and Shear Slip Behavior Analysis
Effects of the End-Zone Reinforcements and Strand-Debonding on the Temporal Changes of Principal Stresses at the Ends of the Hollow PC-Girders
The Degradation of Reinforced Concrete Bridge Elements
Determination of Material Design Values for Steel Fibre Reinforced Self-Stressing Concrete (SFRSSC) and Regular Steel Fibre Reinforced Concrete (SFRC) in Statically Indeterminate Round Panel Tests
Concrete Sustainable Buildings Using Domestic Wastewater Treated
Preliminary Investigation of Geopolymer Mixture Using GGBFS and Off-ASTM Class F Fly Ash
Effect of Thermal Stimulation of Superplasticizer on Basic Properties of Mortar
Influence of Eggshell Powder as Cementitious Blends in Cement Mortar
Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material
A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition
The Study on Blast Furnace Slag on Different Conditions as Curing Condition and Blaine Value Ratio Influence Improving Strength Performance
Development of 100% Recycled Thermoplastic Composites for Sound Insulated Acoustic Panels
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (I): Meteorological Parameters
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (II): Material Parameters
Fabrication and Mechanical Behavior of Portland Cement Mortars Reinforced with Ichu Fibers
The Study Influence of Sugarcane Leaves Fibers Ratio on Compressive Strength of Fire Clay Bricks
Acetic Acid Modified Steel Slag via Dry Chemical Modification Method for Enhancing the Hydraulic Reactivity
Chapter 8: Waste Recycling and Degradation
Visible Light Photocatalytic Degradation of Methylene Blue Using Polypyrrole-Coated Molybdenum-Based Magnetic Photocatalyst
Valorization of Cotton Wastes for Production of Cellulose Nanocrystals
Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste
Microwave-Assisted Conversion of Waste Coffee Grounds to Turbostratic Carbon
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
3D Printing;Alloy;Biomaterials;Catalysis;Cement;Cladding;Composite;Computational Materials Science;Concrete;Conductive Polymer;Crack Propagation;Electrolyte;Esterification;Fly Ash;Functional Materials;Geopolymer Mixture;Mechanical Properties;Mortar
Preface
Chapter 1: Polymers and Composites
Long and Short Human Hair Fiber-Reinforced Polymer Composites: Mechanical Properties for Engineering Applications
Study of the Mechanical Properties of Polymer Composites Based on Polyolefins with the Addition of Rice Husk and Compatibilizer
Assessment on the Potential Application of Salago Fiber Composite as an Alternative Material in Drone Airframe
Enhancement of Mechanical Properties of Carbon Nanotube Reinforced Al Composites Fabricated by Spark Plasma Sintering Using Hot Rolling Techniques
Fabrication and Mechanical Evaluation of Pressed Wood Powder Compounds Reinforced with Alpaca Wool and Ichu
Mechanical, Thermal and Morphological Properties of Poly(Lactic Acid) and Poly(Butylene Adipate-co-Terephthalate) Blends with Organoclay
Modelling the Toughness of Nanostructured Polyhedral Oligomeric Silsesquioxane Composites Fabricated by Stereolithography 3D Printing: A Response Surface Methodology and Artificial Neural Network Approach
Property Improvement of Recycled Nylon 6 by Thermoplastic Poly(Ether-Ester) Elastomer and Wollastonite
Chapter 2: Materials Physics and Computational Materials Science
Magneto-Transport Properties and Hole Self-Doping due to Excess Oxygen Addition in Polycrystalline LaMnO3
Thermal Conduction: Computational Model and Engineering Applications
First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy
Machine Learning Enabled Prediction of Electromagnetic Interference Shielding Effectiveness of Poly(Vinylidene Fluoride)/Mxene Nanocomposites
Chapter 3: Functional Materials
Tailoring the Everolimus Immobilisation Time on Poly(L-Lactic Acid/ Poly(D-Lactic Acid) Scaffold for Biodegradable Stent Coating Development
Self-Healing of Epoxy-Loaded Halloysite Nanotubes/Polysulfone Nanocomposite Membrane
Poly(L-Lactide) Membrane as an Elastic Membrane to Support Cardiac Bleeding Intervention
Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials
Characterization of the Properties of Chitosan Nanoparticles (CSNPs)/PEO Nanofibrous Membranes
Chapter 5: Materials and Technologies for Microelectronics and Energy Saving and Energy Conversion Devices
Novel Gel-Polymer Electrolytes for Sodium-Ion Secondary Batteries - An Electrochemical Impedance Spectroscopic Studies
Supercapacitive Performance of Electrochemically Synthesized Samarium Cobalt Oxide Nanosheets and Nanoflowers
Enhance Growth Temperature ZnO Nr Photoanode DSSC for Performance of Photo-Supercapacitor via Hydrothermal
Comparative Parametric Analysis of Class-B Power Amplifier Using BJT, Single-Gate MOSFET, and Double-Gate MOSFET
Investigation on the Structural and Electrical Properties of ZnO Thin Films Co-Doped with Rare Earth Gd and Al Prepared by Co-Sputtering Method
Fabrication of Aluminum Nickel Reactive Bilayer by the Lift-Off Process
Chapter 4: Materials Chemistry and Chemical Engineering
Thermally Conductive Cellulose/Coper Composite Rods for Tailoring the Characteristics of Cigarettes
Development of Catalysts for Synthesizing Methanol from Syngas
Free Fatty Acid Reduction of Palm Oil Mill Effluent (POME) Using Heterogeneous Acid Catalyst for Esterification
Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method
Chapter 6: Structural Metals and Alloys, Processing Technologies
Welding Parameter Optimization for Improvement of Mechanical Strength of Weld Line
Interference Phenomena on Infrared Thermography during a Mushy Solidification Zone
Hybrid Products from Laser Powder Bed Fusion Manufactured Inconel 718 and 316L Utilizing Laser Welding
Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove
A Polynomial Equation Model for Fatigue Crack Propagation in an Aeronautical Steel Material
The Damping Effect of Particle-Filled Hollow Sphere Structures and their Application in Machine Tool Components
Importance of Finite Element Analysis for Verification of Technological Parameters of Seamless Tubes Production Obtained by Experiment
Influence of Air Gap Size to Mechanical Properties of Laser Welded Lap Joints
Study on the Preparation and Characteristics of Copper-Chromium Alloy Cladding Layer
Environmental Damage Behavior of 2A12 Aluminum Alloy under Coupling Action of Marine Atmospheric Environment and Tensile-Compressive Load
A FEM Analysis on the Influence of Manganese on Carbon and Chromium Macrosegregation in Large Size Steel Ingot
FEM Simulation of the Effect of Mold Initial Temperature on Carbon Macrosegregation in Large-Size Steel Ingots
Chapter 7: Building Materials and Structural Units
Effect of Local Coarse Aggregates on the Compressive Strength of High Strength Concrete
New-and-Old Concrete Interface Shearing Strength Test and Shear Slip Behavior Analysis
Effects of the End-Zone Reinforcements and Strand-Debonding on the Temporal Changes of Principal Stresses at the Ends of the Hollow PC-Girders
The Degradation of Reinforced Concrete Bridge Elements
Determination of Material Design Values for Steel Fibre Reinforced Self-Stressing Concrete (SFRSSC) and Regular Steel Fibre Reinforced Concrete (SFRC) in Statically Indeterminate Round Panel Tests
Concrete Sustainable Buildings Using Domestic Wastewater Treated
Preliminary Investigation of Geopolymer Mixture Using GGBFS and Off-ASTM Class F Fly Ash
Effect of Thermal Stimulation of Superplasticizer on Basic Properties of Mortar
Influence of Eggshell Powder as Cementitious Blends in Cement Mortar
Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material
A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition
The Study on Blast Furnace Slag on Different Conditions as Curing Condition and Blaine Value Ratio Influence Improving Strength Performance
Development of 100% Recycled Thermoplastic Composites for Sound Insulated Acoustic Panels
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (I): Meteorological Parameters
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (II): Material Parameters
Fabrication and Mechanical Behavior of Portland Cement Mortars Reinforced with Ichu Fibers
The Study Influence of Sugarcane Leaves Fibers Ratio on Compressive Strength of Fire Clay Bricks
Acetic Acid Modified Steel Slag via Dry Chemical Modification Method for Enhancing the Hydraulic Reactivity
Chapter 8: Waste Recycling and Degradation
Visible Light Photocatalytic Degradation of Methylene Blue Using Polypyrrole-Coated Molybdenum-Based Magnetic Photocatalyst
Valorization of Cotton Wastes for Production of Cellulose Nanocrystals
Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste
Microwave-Assisted Conversion of Waste Coffee Grounds to Turbostratic Carbon
Chapter 1: Polymers and Composites
Long and Short Human Hair Fiber-Reinforced Polymer Composites: Mechanical Properties for Engineering Applications
Study of the Mechanical Properties of Polymer Composites Based on Polyolefins with the Addition of Rice Husk and Compatibilizer
Assessment on the Potential Application of Salago Fiber Composite as an Alternative Material in Drone Airframe
Enhancement of Mechanical Properties of Carbon Nanotube Reinforced Al Composites Fabricated by Spark Plasma Sintering Using Hot Rolling Techniques
Fabrication and Mechanical Evaluation of Pressed Wood Powder Compounds Reinforced with Alpaca Wool and Ichu
Mechanical, Thermal and Morphological Properties of Poly(Lactic Acid) and Poly(Butylene Adipate-co-Terephthalate) Blends with Organoclay
Modelling the Toughness of Nanostructured Polyhedral Oligomeric Silsesquioxane Composites Fabricated by Stereolithography 3D Printing: A Response Surface Methodology and Artificial Neural Network Approach
Property Improvement of Recycled Nylon 6 by Thermoplastic Poly(Ether-Ester) Elastomer and Wollastonite
Chapter 2: Materials Physics and Computational Materials Science
Magneto-Transport Properties and Hole Self-Doping due to Excess Oxygen Addition in Polycrystalline LaMnO3
Thermal Conduction: Computational Model and Engineering Applications
First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy
Machine Learning Enabled Prediction of Electromagnetic Interference Shielding Effectiveness of Poly(Vinylidene Fluoride)/Mxene Nanocomposites
Chapter 3: Functional Materials
Tailoring the Everolimus Immobilisation Time on Poly(L-Lactic Acid/ Poly(D-Lactic Acid) Scaffold for Biodegradable Stent Coating Development
Self-Healing of Epoxy-Loaded Halloysite Nanotubes/Polysulfone Nanocomposite Membrane
Poly(L-Lactide) Membrane as an Elastic Membrane to Support Cardiac Bleeding Intervention
Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials
Characterization of the Properties of Chitosan Nanoparticles (CSNPs)/PEO Nanofibrous Membranes
Chapter 5: Materials and Technologies for Microelectronics and Energy Saving and Energy Conversion Devices
Novel Gel-Polymer Electrolytes for Sodium-Ion Secondary Batteries - An Electrochemical Impedance Spectroscopic Studies
Supercapacitive Performance of Electrochemically Synthesized Samarium Cobalt Oxide Nanosheets and Nanoflowers
Enhance Growth Temperature ZnO Nr Photoanode DSSC for Performance of Photo-Supercapacitor via Hydrothermal
Comparative Parametric Analysis of Class-B Power Amplifier Using BJT, Single-Gate MOSFET, and Double-Gate MOSFET
Investigation on the Structural and Electrical Properties of ZnO Thin Films Co-Doped with Rare Earth Gd and Al Prepared by Co-Sputtering Method
Fabrication of Aluminum Nickel Reactive Bilayer by the Lift-Off Process
Chapter 4: Materials Chemistry and Chemical Engineering
Thermally Conductive Cellulose/Coper Composite Rods for Tailoring the Characteristics of Cigarettes
Development of Catalysts for Synthesizing Methanol from Syngas
Free Fatty Acid Reduction of Palm Oil Mill Effluent (POME) Using Heterogeneous Acid Catalyst for Esterification
Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method
Chapter 6: Structural Metals and Alloys, Processing Technologies
Welding Parameter Optimization for Improvement of Mechanical Strength of Weld Line
Interference Phenomena on Infrared Thermography during a Mushy Solidification Zone
Hybrid Products from Laser Powder Bed Fusion Manufactured Inconel 718 and 316L Utilizing Laser Welding
Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove
A Polynomial Equation Model for Fatigue Crack Propagation in an Aeronautical Steel Material
The Damping Effect of Particle-Filled Hollow Sphere Structures and their Application in Machine Tool Components
Importance of Finite Element Analysis for Verification of Technological Parameters of Seamless Tubes Production Obtained by Experiment
Influence of Air Gap Size to Mechanical Properties of Laser Welded Lap Joints
Study on the Preparation and Characteristics of Copper-Chromium Alloy Cladding Layer
Environmental Damage Behavior of 2A12 Aluminum Alloy under Coupling Action of Marine Atmospheric Environment and Tensile-Compressive Load
A FEM Analysis on the Influence of Manganese on Carbon and Chromium Macrosegregation in Large Size Steel Ingot
FEM Simulation of the Effect of Mold Initial Temperature on Carbon Macrosegregation in Large-Size Steel Ingots
Chapter 7: Building Materials and Structural Units
Effect of Local Coarse Aggregates on the Compressive Strength of High Strength Concrete
New-and-Old Concrete Interface Shearing Strength Test and Shear Slip Behavior Analysis
Effects of the End-Zone Reinforcements and Strand-Debonding on the Temporal Changes of Principal Stresses at the Ends of the Hollow PC-Girders
The Degradation of Reinforced Concrete Bridge Elements
Determination of Material Design Values for Steel Fibre Reinforced Self-Stressing Concrete (SFRSSC) and Regular Steel Fibre Reinforced Concrete (SFRC) in Statically Indeterminate Round Panel Tests
Concrete Sustainable Buildings Using Domestic Wastewater Treated
Preliminary Investigation of Geopolymer Mixture Using GGBFS and Off-ASTM Class F Fly Ash
Effect of Thermal Stimulation of Superplasticizer on Basic Properties of Mortar
Influence of Eggshell Powder as Cementitious Blends in Cement Mortar
Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material
A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition
The Study on Blast Furnace Slag on Different Conditions as Curing Condition and Blaine Value Ratio Influence Improving Strength Performance
Development of 100% Recycled Thermoplastic Composites for Sound Insulated Acoustic Panels
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (I): Meteorological Parameters
Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (II): Material Parameters
Fabrication and Mechanical Behavior of Portland Cement Mortars Reinforced with Ichu Fibers
The Study Influence of Sugarcane Leaves Fibers Ratio on Compressive Strength of Fire Clay Bricks
Acetic Acid Modified Steel Slag via Dry Chemical Modification Method for Enhancing the Hydraulic Reactivity
Chapter 8: Waste Recycling and Degradation
Visible Light Photocatalytic Degradation of Methylene Blue Using Polypyrrole-Coated Molybdenum-Based Magnetic Photocatalyst
Valorization of Cotton Wastes for Production of Cellulose Nanocrystals
Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste
Microwave-Assisted Conversion of Waste Coffee Grounds to Turbostratic Carbon
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
