Materials Science and Metallurgical Technology III
portes grátis
Materials Science and Metallurgical Technology III
Radionov, Andrey A.
Trans Tech Publications Ltd
03/2022
526
Mole
Inglês
9783035718416
15 a 20 dias
1020
Descrição não disponível.
Preface
Chapter 1: Materials Synthesis, Treatment and Characterisation
Technological Justification of the Possibility of Applying Wear-Resistant Coatings to Strengthen Machine Parts
Composite Chrome Coatings in Aluminum Production
Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes
Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line
Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis
Mechanical Similarity Principle for Measurement Metal Hardness
Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents
Self-Healing of PVD-Coatings
Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy
Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface
Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool
Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3?nH2O
Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron
Study of the Behavior of SS34 in a Free and Heat-Treated State
Determination of the Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum
The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics
Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO
Modeling the Structural Strength of Materials on Disk Laboratory Specimens
Viscosity of Microdestruction of Multilayer Composite and Method of its Revealing
Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition
On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel
Physical Aspects of Laser Steel Processing in the Magnetic Field
Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning
The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites
Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy
FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings
Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites
On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging
Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics
Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel
Composite and Metal Structural Elements Joint Strength
Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating
Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles
Oxidation Resistance of "Ni-Cr-Si-B-Alloy + Nb + B" Protective Layers, Produced by Non-Vacuum Electron Beam Cladding Technique
Chapter 2: Technologies in Pyrometallurgy and Electrometallurgy
How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes
Ducat Deposit Concentrate Pyrometallurgical Processing Technology
Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes
Investigation of the Impurities Formation during the Silicon Melt Crystallization
Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation
Protection of Cast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell
Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores
Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction
Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode
Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties
Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC
Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets
Chapter 3: Modern Problems of Foundry Production
Features of Casting Magnesium Alloys in Chill Mold
The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron
Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts
On the Issue of Casting Copper Alloys in Chill Mold
Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System
Investment Casting for Oil and Gas Complex
Chapter 4: Metal Forming
Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix
Local Thickenings and Thinnings of Hot Rolled Strips
Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet
New Die Design for High-Pressure Torsion
Change in Mechanical Properties During Drawing of Wire from Ni 99.6
Roller Drawing of Simple Profiles from Hard-to-Form Alloys
Investigation of Causes of Wall Thinning during Stamping of Halves of Stamped-Welded Elbows
Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal
Chapter 5: Technologies of Welding Production
Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds
Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process
Modeling of High Module Power Sources Systems Safety Processes
Chapter 6: Additive Manufacturing
Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process
Chapter 7: Industrial Ecology and Waste Recycling
Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production
Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection
The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching of Bauxite-Sintering Product
Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency
The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials
Production Tests of the Don Water Purification and Disinfection Technology
Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials
Process Development for Integrated Use of Metallurgical Production Wastes
Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores
Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production
Choosing the Reagent to Leach Fluorine from Spent Pot Lining of Aluminum Electrolysis Cells
Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production
Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals
Chapter 1: Materials Synthesis, Treatment and Characterisation
Technological Justification of the Possibility of Applying Wear-Resistant Coatings to Strengthen Machine Parts
Composite Chrome Coatings in Aluminum Production
Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes
Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line
Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis
Mechanical Similarity Principle for Measurement Metal Hardness
Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents
Self-Healing of PVD-Coatings
Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy
Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface
Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool
Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3?nH2O
Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron
Study of the Behavior of SS34 in a Free and Heat-Treated State
Determination of the Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum
The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics
Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO
Modeling the Structural Strength of Materials on Disk Laboratory Specimens
Viscosity of Microdestruction of Multilayer Composite and Method of its Revealing
Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition
On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel
Physical Aspects of Laser Steel Processing in the Magnetic Field
Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning
The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites
Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy
FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings
Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites
On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging
Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics
Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel
Composite and Metal Structural Elements Joint Strength
Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating
Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles
Oxidation Resistance of "Ni-Cr-Si-B-Alloy + Nb + B" Protective Layers, Produced by Non-Vacuum Electron Beam Cladding Technique
Chapter 2: Technologies in Pyrometallurgy and Electrometallurgy
How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes
Ducat Deposit Concentrate Pyrometallurgical Processing Technology
Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes
Investigation of the Impurities Formation during the Silicon Melt Crystallization
Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation
Protection of Cast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell
Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores
Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction
Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode
Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties
Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC
Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets
Chapter 3: Modern Problems of Foundry Production
Features of Casting Magnesium Alloys in Chill Mold
The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron
Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts
On the Issue of Casting Copper Alloys in Chill Mold
Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System
Investment Casting for Oil and Gas Complex
Chapter 4: Metal Forming
Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix
Local Thickenings and Thinnings of Hot Rolled Strips
Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet
New Die Design for High-Pressure Torsion
Change in Mechanical Properties During Drawing of Wire from Ni 99.6
Roller Drawing of Simple Profiles from Hard-to-Form Alloys
Investigation of Causes of Wall Thinning during Stamping of Halves of Stamped-Welded Elbows
Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal
Chapter 5: Technologies of Welding Production
Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds
Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process
Modeling of High Module Power Sources Systems Safety Processes
Chapter 6: Additive Manufacturing
Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process
Chapter 7: Industrial Ecology and Waste Recycling
Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production
Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection
The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching of Bauxite-Sintering Product
Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency
The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials
Production Tests of the Don Water Purification and Disinfection Technology
Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials
Process Development for Integrated Use of Metallurgical Production Wastes
Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores
Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production
Choosing the Reagent to Leach Fluorine from Spent Pot Lining of Aluminum Electrolysis Cells
Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production
Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Additive Manufacturing;Alloy;Cast Iron;Ceramics;Coating;Composite;Crystallization;Drawing;Electron Beam Cladding;Explosion Welding;Foundry Production;Granulometric Composition;Hardness;Industrial Waste;Laser Processing;Mechanical Properties
Preface
Chapter 1: Materials Synthesis, Treatment and Characterisation
Technological Justification of the Possibility of Applying Wear-Resistant Coatings to Strengthen Machine Parts
Composite Chrome Coatings in Aluminum Production
Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes
Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line
Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis
Mechanical Similarity Principle for Measurement Metal Hardness
Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents
Self-Healing of PVD-Coatings
Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy
Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface
Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool
Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3?nH2O
Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron
Study of the Behavior of SS34 in a Free and Heat-Treated State
Determination of the Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum
The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics
Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO
Modeling the Structural Strength of Materials on Disk Laboratory Specimens
Viscosity of Microdestruction of Multilayer Composite and Method of its Revealing
Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition
On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel
Physical Aspects of Laser Steel Processing in the Magnetic Field
Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning
The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites
Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy
FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings
Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites
On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging
Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics
Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel
Composite and Metal Structural Elements Joint Strength
Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating
Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles
Oxidation Resistance of "Ni-Cr-Si-B-Alloy + Nb + B" Protective Layers, Produced by Non-Vacuum Electron Beam Cladding Technique
Chapter 2: Technologies in Pyrometallurgy and Electrometallurgy
How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes
Ducat Deposit Concentrate Pyrometallurgical Processing Technology
Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes
Investigation of the Impurities Formation during the Silicon Melt Crystallization
Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation
Protection of Cast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell
Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores
Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction
Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode
Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties
Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC
Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets
Chapter 3: Modern Problems of Foundry Production
Features of Casting Magnesium Alloys in Chill Mold
The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron
Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts
On the Issue of Casting Copper Alloys in Chill Mold
Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System
Investment Casting for Oil and Gas Complex
Chapter 4: Metal Forming
Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix
Local Thickenings and Thinnings of Hot Rolled Strips
Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet
New Die Design for High-Pressure Torsion
Change in Mechanical Properties During Drawing of Wire from Ni 99.6
Roller Drawing of Simple Profiles from Hard-to-Form Alloys
Investigation of Causes of Wall Thinning during Stamping of Halves of Stamped-Welded Elbows
Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal
Chapter 5: Technologies of Welding Production
Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds
Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process
Modeling of High Module Power Sources Systems Safety Processes
Chapter 6: Additive Manufacturing
Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process
Chapter 7: Industrial Ecology and Waste Recycling
Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production
Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection
The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching of Bauxite-Sintering Product
Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency
The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials
Production Tests of the Don Water Purification and Disinfection Technology
Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials
Process Development for Integrated Use of Metallurgical Production Wastes
Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores
Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production
Choosing the Reagent to Leach Fluorine from Spent Pot Lining of Aluminum Electrolysis Cells
Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production
Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals
Chapter 1: Materials Synthesis, Treatment and Characterisation
Technological Justification of the Possibility of Applying Wear-Resistant Coatings to Strengthen Machine Parts
Composite Chrome Coatings in Aluminum Production
Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes
Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line
Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis
Mechanical Similarity Principle for Measurement Metal Hardness
Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents
Self-Healing of PVD-Coatings
Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy
Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface
Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool
Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3?nH2O
Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron
Study of the Behavior of SS34 in a Free and Heat-Treated State
Determination of the Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum
The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics
Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO
Modeling the Structural Strength of Materials on Disk Laboratory Specimens
Viscosity of Microdestruction of Multilayer Composite and Method of its Revealing
Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition
On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel
Physical Aspects of Laser Steel Processing in the Magnetic Field
Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning
The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites
Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy
FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings
Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites
On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging
Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics
Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel
Composite and Metal Structural Elements Joint Strength
Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating
Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles
Oxidation Resistance of "Ni-Cr-Si-B-Alloy + Nb + B" Protective Layers, Produced by Non-Vacuum Electron Beam Cladding Technique
Chapter 2: Technologies in Pyrometallurgy and Electrometallurgy
How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes
Ducat Deposit Concentrate Pyrometallurgical Processing Technology
Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes
Investigation of the Impurities Formation during the Silicon Melt Crystallization
Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation
Protection of Cast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell
Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores
Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction
Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode
Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties
Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC
Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets
Chapter 3: Modern Problems of Foundry Production
Features of Casting Magnesium Alloys in Chill Mold
The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron
Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts
On the Issue of Casting Copper Alloys in Chill Mold
Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System
Investment Casting for Oil and Gas Complex
Chapter 4: Metal Forming
Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix
Local Thickenings and Thinnings of Hot Rolled Strips
Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet
New Die Design for High-Pressure Torsion
Change in Mechanical Properties During Drawing of Wire from Ni 99.6
Roller Drawing of Simple Profiles from Hard-to-Form Alloys
Investigation of Causes of Wall Thinning during Stamping of Halves of Stamped-Welded Elbows
Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal
Chapter 5: Technologies of Welding Production
Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds
Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process
Modeling of High Module Power Sources Systems Safety Processes
Chapter 6: Additive Manufacturing
Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis
Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process
Chapter 7: Industrial Ecology and Waste Recycling
Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production
Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection
The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching of Bauxite-Sintering Product
Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency
The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials
Production Tests of the Don Water Purification and Disinfection Technology
Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials
Process Development for Integrated Use of Metallurgical Production Wastes
Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores
Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production
Choosing the Reagent to Leach Fluorine from Spent Pot Lining of Aluminum Electrolysis Cells
Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production
Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
