Materials Science and Technologies
portes grátis
Materials Science and Technologies
Li, Zong Jin
Trans Tech Publications Ltd
08/2021
236
Mole
Inglês
9783035717891
15 a 20 dias
540
Descrição não disponível.
Preface
Chapter 1: Properties and Processing Technologies of Alloys
Corrosion Resistance of Industrial Pure Titanium and its Alloys under High Temperature and Different Cooling Methods
Fatigue Life of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole
Investigation on Stress and Strain of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole Based on Abacus
Damage Behavior in Simulated Service Environment of Thermal Control Oxidation Film of 2A12 Alloy
Chapter 2: Materials and Technologies of Chemical Production and Chemical Processing
Fixed-Bed Adsorption Column Studies for the Removal of Methyl Orange from Water Using Polyethyleneimine-Graphene Oxide Polymer Nanocomposite Beads
In Situ Synthesis of SiO2 Nanoparticles by Sol-Gel Method on Cotton Fabrics and Investigation of their Physical and Chemical Properties
Localized Surface Plasmon Resonance Effect of Gold Nanoparticles Using 3-Mercaptopropionic Acid as Capping Material for Sensing Probe
Fe/S Co-Doped Titanium Dioxide Nanotubes: Optimization of the Photoelectrocatalytic Degradation Kinetics of Phenol Red
Highly Active Fischer-Tropsch Synthesis Fe-BDC MOF-Derived Catalyst Prepared by Modified Solvothermal Method
The Effect of Sodium Hydroxide Concentration on the Structure of Iron Oxides@Bacterial Cellulose and their Catalytic Activity for Methylene Blue Degradation in Solution
Graphite Foil Waste to Graphene: New Carbon Precursors for Synthesis of Graphene and its Oxides
Chapter 3: Functional Materials
Characterization of Cellulose Acetate Based Scaffolds Derived from Kapok Fiber (Ceiba pentandra (L) Gaertn)
The Influence of Ph on Green Synthesis of Honey-Mediated Silver Nanoparticles
Challenges and Opportunities for the Applications of Unconventional Superconductors
Aluminum-Air Battery with Buckypaper Air Cathode
Performance Testing of NaCMC/HPC/NaAlg Hydrogels for Agricultural Applications
Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey
Maximization of Natural Frequencies for Functionally Graded Rectangular Plates
Chapter 4: Polymers and Composites
A Comparative Study between Jute and Glass Fiber Reinforced Composites
Synthesis of Polylactic Acid/Cellulose Composite Extracted from Pineapple Leaves
Strengthening of PBX Perforated Plate Based on Polymer Coating
Tool Wear Characteristics of TiCn/Al2O3 Coated Carbide Inserts while Turning Glass Fiber Reinforced Epoxy Resin under Cryogenic Cooling
Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament
Chapter 5: Minimization of Technological Defects with Six Sigma Conception
Dip Degreasing Stage Improvement in Car Body Pretreatment Process by Six Sigma
Defects Reduction in Spheroidal Graphite Iron Casting Process of a Jackscrew Manufacturer
Chapter 6: Building Materials and Technology
Effect of Ageing on Rheological Properties of Asphalt
Bitumen Rheological and Chemical Investigation
Study on the Temperature Sensibility of Carbon Fiber Reinforced Concrete (CFRC) Road Material
Effect of Ultraviolet Aging on Composition, Structure and Properties of Asphalt
Research on the Construction Technology of Self-Monitoring Asphalt Concrete
Research on Aging Performance of AH-90 and PG70-28SBS Modified Asphalt
Sustainable Reinforced Concrete Design of Structural Walls
Chapter 1: Properties and Processing Technologies of Alloys
Corrosion Resistance of Industrial Pure Titanium and its Alloys under High Temperature and Different Cooling Methods
Fatigue Life of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole
Investigation on Stress and Strain of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole Based on Abacus
Damage Behavior in Simulated Service Environment of Thermal Control Oxidation Film of 2A12 Alloy
Chapter 2: Materials and Technologies of Chemical Production and Chemical Processing
Fixed-Bed Adsorption Column Studies for the Removal of Methyl Orange from Water Using Polyethyleneimine-Graphene Oxide Polymer Nanocomposite Beads
In Situ Synthesis of SiO2 Nanoparticles by Sol-Gel Method on Cotton Fabrics and Investigation of their Physical and Chemical Properties
Localized Surface Plasmon Resonance Effect of Gold Nanoparticles Using 3-Mercaptopropionic Acid as Capping Material for Sensing Probe
Fe/S Co-Doped Titanium Dioxide Nanotubes: Optimization of the Photoelectrocatalytic Degradation Kinetics of Phenol Red
Highly Active Fischer-Tropsch Synthesis Fe-BDC MOF-Derived Catalyst Prepared by Modified Solvothermal Method
The Effect of Sodium Hydroxide Concentration on the Structure of Iron Oxides@Bacterial Cellulose and their Catalytic Activity for Methylene Blue Degradation in Solution
Graphite Foil Waste to Graphene: New Carbon Precursors for Synthesis of Graphene and its Oxides
Chapter 3: Functional Materials
Characterization of Cellulose Acetate Based Scaffolds Derived from Kapok Fiber (Ceiba pentandra (L) Gaertn)
The Influence of Ph on Green Synthesis of Honey-Mediated Silver Nanoparticles
Challenges and Opportunities for the Applications of Unconventional Superconductors
Aluminum-Air Battery with Buckypaper Air Cathode
Performance Testing of NaCMC/HPC/NaAlg Hydrogels for Agricultural Applications
Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey
Maximization of Natural Frequencies for Functionally Graded Rectangular Plates
Chapter 4: Polymers and Composites
A Comparative Study between Jute and Glass Fiber Reinforced Composites
Synthesis of Polylactic Acid/Cellulose Composite Extracted from Pineapple Leaves
Strengthening of PBX Perforated Plate Based on Polymer Coating
Tool Wear Characteristics of TiCn/Al2O3 Coated Carbide Inserts while Turning Glass Fiber Reinforced Epoxy Resin under Cryogenic Cooling
Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament
Chapter 5: Minimization of Technological Defects with Six Sigma Conception
Dip Degreasing Stage Improvement in Car Body Pretreatment Process by Six Sigma
Defects Reduction in Spheroidal Graphite Iron Casting Process of a Jackscrew Manufacturer
Chapter 6: Building Materials and Technology
Effect of Ageing on Rheological Properties of Asphalt
Bitumen Rheological and Chemical Investigation
Study on the Temperature Sensibility of Carbon Fiber Reinforced Concrete (CFRC) Road Material
Effect of Ultraviolet Aging on Composition, Structure and Properties of Asphalt
Research on the Construction Technology of Self-Monitoring Asphalt Concrete
Research on Aging Performance of AH-90 and PG70-28SBS Modified Asphalt
Sustainable Reinforced Concrete Design of Structural Walls
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Alloy;Asphalt;Catalytic Activity;Chemical Technologies;Composite;Corrosion;Degradation Kinetics;Fiber Reinforcing;Functional Materials;Mechanical Properties;Nanocomposite;Nanoparticle;Polymer;Precursor;Reinforced Concrete;Six Sigma;Superalloy
Preface
Chapter 1: Properties and Processing Technologies of Alloys
Corrosion Resistance of Industrial Pure Titanium and its Alloys under High Temperature and Different Cooling Methods
Fatigue Life of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole
Investigation on Stress and Strain of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole Based on Abacus
Damage Behavior in Simulated Service Environment of Thermal Control Oxidation Film of 2A12 Alloy
Chapter 2: Materials and Technologies of Chemical Production and Chemical Processing
Fixed-Bed Adsorption Column Studies for the Removal of Methyl Orange from Water Using Polyethyleneimine-Graphene Oxide Polymer Nanocomposite Beads
In Situ Synthesis of SiO2 Nanoparticles by Sol-Gel Method on Cotton Fabrics and Investigation of their Physical and Chemical Properties
Localized Surface Plasmon Resonance Effect of Gold Nanoparticles Using 3-Mercaptopropionic Acid as Capping Material for Sensing Probe
Fe/S Co-Doped Titanium Dioxide Nanotubes: Optimization of the Photoelectrocatalytic Degradation Kinetics of Phenol Red
Highly Active Fischer-Tropsch Synthesis Fe-BDC MOF-Derived Catalyst Prepared by Modified Solvothermal Method
The Effect of Sodium Hydroxide Concentration on the Structure of Iron Oxides@Bacterial Cellulose and their Catalytic Activity for Methylene Blue Degradation in Solution
Graphite Foil Waste to Graphene: New Carbon Precursors for Synthesis of Graphene and its Oxides
Chapter 3: Functional Materials
Characterization of Cellulose Acetate Based Scaffolds Derived from Kapok Fiber (Ceiba pentandra (L) Gaertn)
The Influence of Ph on Green Synthesis of Honey-Mediated Silver Nanoparticles
Challenges and Opportunities for the Applications of Unconventional Superconductors
Aluminum-Air Battery with Buckypaper Air Cathode
Performance Testing of NaCMC/HPC/NaAlg Hydrogels for Agricultural Applications
Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey
Maximization of Natural Frequencies for Functionally Graded Rectangular Plates
Chapter 4: Polymers and Composites
A Comparative Study between Jute and Glass Fiber Reinforced Composites
Synthesis of Polylactic Acid/Cellulose Composite Extracted from Pineapple Leaves
Strengthening of PBX Perforated Plate Based on Polymer Coating
Tool Wear Characteristics of TiCn/Al2O3 Coated Carbide Inserts while Turning Glass Fiber Reinforced Epoxy Resin under Cryogenic Cooling
Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament
Chapter 5: Minimization of Technological Defects with Six Sigma Conception
Dip Degreasing Stage Improvement in Car Body Pretreatment Process by Six Sigma
Defects Reduction in Spheroidal Graphite Iron Casting Process of a Jackscrew Manufacturer
Chapter 6: Building Materials and Technology
Effect of Ageing on Rheological Properties of Asphalt
Bitumen Rheological and Chemical Investigation
Study on the Temperature Sensibility of Carbon Fiber Reinforced Concrete (CFRC) Road Material
Effect of Ultraviolet Aging on Composition, Structure and Properties of Asphalt
Research on the Construction Technology of Self-Monitoring Asphalt Concrete
Research on Aging Performance of AH-90 and PG70-28SBS Modified Asphalt
Sustainable Reinforced Concrete Design of Structural Walls
Chapter 1: Properties and Processing Technologies of Alloys
Corrosion Resistance of Industrial Pure Titanium and its Alloys under High Temperature and Different Cooling Methods
Fatigue Life of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole
Investigation on Stress and Strain of Ni-Based Single Crystal Super-Alloy Specimen with Single Hole Based on Abacus
Damage Behavior in Simulated Service Environment of Thermal Control Oxidation Film of 2A12 Alloy
Chapter 2: Materials and Technologies of Chemical Production and Chemical Processing
Fixed-Bed Adsorption Column Studies for the Removal of Methyl Orange from Water Using Polyethyleneimine-Graphene Oxide Polymer Nanocomposite Beads
In Situ Synthesis of SiO2 Nanoparticles by Sol-Gel Method on Cotton Fabrics and Investigation of their Physical and Chemical Properties
Localized Surface Plasmon Resonance Effect of Gold Nanoparticles Using 3-Mercaptopropionic Acid as Capping Material for Sensing Probe
Fe/S Co-Doped Titanium Dioxide Nanotubes: Optimization of the Photoelectrocatalytic Degradation Kinetics of Phenol Red
Highly Active Fischer-Tropsch Synthesis Fe-BDC MOF-Derived Catalyst Prepared by Modified Solvothermal Method
The Effect of Sodium Hydroxide Concentration on the Structure of Iron Oxides@Bacterial Cellulose and their Catalytic Activity for Methylene Blue Degradation in Solution
Graphite Foil Waste to Graphene: New Carbon Precursors for Synthesis of Graphene and its Oxides
Chapter 3: Functional Materials
Characterization of Cellulose Acetate Based Scaffolds Derived from Kapok Fiber (Ceiba pentandra (L) Gaertn)
The Influence of Ph on Green Synthesis of Honey-Mediated Silver Nanoparticles
Challenges and Opportunities for the Applications of Unconventional Superconductors
Aluminum-Air Battery with Buckypaper Air Cathode
Performance Testing of NaCMC/HPC/NaAlg Hydrogels for Agricultural Applications
Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey
Maximization of Natural Frequencies for Functionally Graded Rectangular Plates
Chapter 4: Polymers and Composites
A Comparative Study between Jute and Glass Fiber Reinforced Composites
Synthesis of Polylactic Acid/Cellulose Composite Extracted from Pineapple Leaves
Strengthening of PBX Perforated Plate Based on Polymer Coating
Tool Wear Characteristics of TiCn/Al2O3 Coated Carbide Inserts while Turning Glass Fiber Reinforced Epoxy Resin under Cryogenic Cooling
Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament
Chapter 5: Minimization of Technological Defects with Six Sigma Conception
Dip Degreasing Stage Improvement in Car Body Pretreatment Process by Six Sigma
Defects Reduction in Spheroidal Graphite Iron Casting Process of a Jackscrew Manufacturer
Chapter 6: Building Materials and Technology
Effect of Ageing on Rheological Properties of Asphalt
Bitumen Rheological and Chemical Investigation
Study on the Temperature Sensibility of Carbon Fiber Reinforced Concrete (CFRC) Road Material
Effect of Ultraviolet Aging on Composition, Structure and Properties of Asphalt
Research on the Construction Technology of Self-Monitoring Asphalt Concrete
Research on Aging Performance of AH-90 and PG70-28SBS Modified Asphalt
Sustainable Reinforced Concrete Design of Structural Walls
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
