Advanced Materials and Manufacturing Engineering II
portes grátis
Advanced Materials and Manufacturing Engineering II
Sengodan, Thangaprakash; Muthusamy, Ramya
Trans Tech Publications Ltd
02/2022
558
Mole
Inglês
9783035712681
15 a 20 dias
1070
Descrição não disponível.
Preface
Chapter 1: Polymers and Composites
Contriving and Assessment of Magnesium Alloy Composites Augmented with Boron Carbide VIA Liquid Metallurgy Route
Production and Assessment of AZ91 Reinforced with Nano SiC through Stir Casting Process
Incorporation of Magnetite in Toughened PLA Nanocomposite: Tensile and Thermal Stability
Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites
Influence of Micro and Nano Particles on Mechanical Behaviour of Slag Reinforced AA7075 Composites
Microstructure Evaluation on Micro and Nano Slag Particles Reinforced AA7075 Composites
A Novel Method to Choose the Experimental Parameters in Large Amplitude Oscillatory Shear Rheology
Characterization and Comparison of Areca Sheath Ash (ASA) and Rice Husk Ash (RHA) for Silica Potential
Corrosion Resistance of Electroless Ni-P-W/ZrO2 Nanocomposite Coatings in Peracid Solutions
Chapter 2: Functional Materials
Thermal Conductivity Analysis of Ethylene Glycol/H2O- Based MgFe2O4 Ferrofluid
Study of Parameters Affecting the Aging of Transformer Oil
Influence of Nano Filler (ZrO2) on Optical and Thermal Studies of Potassium Doped Polyethylene Oxide Solid Polymer Electrolytes
Structural and Transport Properties of La0.85Te0.15MnO3 Manganite and its Composite with Al2O3
Microstructural Analysis of Copper Foil Etched and Annealed in ECR Plasma Reactor
EPR Study of CeO2 Nano Particles
Chapter 3: Materials for Microelectronics and Photovoltaics
Synthesis, Structural, Morphological and I-V Characteristics of Polyaniline-MgCl Composite
Analysis of InN/La2O3 Twosome for Double-Gate MOSFETs for Radio Frequency Applications
Ti Doped Cu2O Thin Films: DC Magnetron Sputtering and Structural and Optical Studies
Studies on Copper Nanometric-Film Deposited by an In-House Developed DC Magnetron Sputtering System
Numerical Investigation into Photovoltaic Performance of Organolead Trihalide Perovskite Quantum Dot Intermediate Band Solar Cell
Temperature Dependent Carrier Transport in Hydrogenated Amorphous Semiconductors for Thin Film Memristive Applications
Influence of Substrate Temperature on Structural and Optical Properties of Co-Evaporated Cu2SnS3/ITO Thin Films
Sol-Gel Processed ZrO2 Based Forming-Free Resistive Switching Memory Devices
Chapter 4: Physical Chemistry, Research and Computational Modelling
Conductivity Tensor in Cylindrical Quantum Wire with Parabolic Potential for the Case of Electron-Acoustic Phonon Scattering
Electronic Properties of Aldehyde Complexes Using DFT for Electrooptical Activity
Generalized Version of ISI Invariant for some Molecular Structures
Synthesis, Characterization and DFT Calculations of a Novel Pyrazole Derivative 4-(1-Phenyl-5-(p-Tolyl)-2,5-Dihydro-1H-Pyrazol-3-Yl)Benzo[c][1,2,5]Oxadiazole
Chapter 5: Materials Processing Technologies
Numerical Simulation of Friction Stir Spot Welding of Aluminium-6061 and Magnesium AZ-31B
Characterization of HVOF Sprayed Al2O3 - CeO2 Coatings Deposited on Mg Az 91 Alloy
WEDM Machining Performance of Al Based Metal Matrix Composites Reinforced with Rice Husk Ash
Numerical and Experimental Studies on Hydro-Forming of a Thin Metallic Disc
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
Impact of Cutting Parameters on Cutting Force of AISI 410 and AISI 420 MSS during CNC Dry Milling
A Comparative Experimental Study on Machining Performance of Aluminium against Advanced Diamond Coated Cutting Tool Inserts
Chapter 6: Building Materials and Structural Elements
Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio
Improving the Performance of Structural Members by Incorporating Incinerated Bio-Medical Waste Ash in Reinforced Geopolymer Concrete
Structural Behaviour of Green Geopolymer Concrete Beams and Columns Made with Waste Wood Ash a Partial Substitution Binder
Flexural Behaviour of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash and Glass Powder
A Comparative Investigation on Normal and High Strength Concrete Beams under Torsion
Modelling the Yield Stress of Fly-Ash Added Superplasticized Cement Paste at Different Temperatures Using Artificial Neural Network
Effective Utilization of Industrial and Agricultural Waste for Developing Sustainable Self-Compacting Concrete
Axial Compression Behaviour Analysis of Insulated Concrete Form (ICF) Wall Panel with Fibre Cement Board
Effect of Using Ground Granulated Blast Furnace Slag in Rigid Pavement Overlays
Effect of Flyash- Rice Husk Ash Blend in the Energy Efficient Geopolymer Tiles Using Industrial Wastes
Experimental Investigation on Fresh and Hardened Properties of High Calcium Flyash Based Geopolymer Concrete
Chapter 7: Phytochemistry and Pharmacology, Food and Biomass Processing
Traditional Peruvian Medicine: An Insight in Geophagy and Machu Rumi Intake
Preliminary Chemical, Total Phenolic Content, Flavonoid Content, and Antioxidant Activity of some Plants Used in Vietnam Folk Medicine
Mechanical Extraction of Neem Seed Kernel (Azadirachta indica A. Juss.) Harvesting in Ninh Thuan, Viet Nam by Using Hydraulic Pressing: Effect of Processing Parameters
Modelling of Liquid-Liquid Equilibria Using NRTL and UNIFAC Equations in the Extraction of Bio-Oil-Based Phenolics Produced from the Pyrolysis of Sugarcane Bagasse
Hydrolysis of S. platensis Using Sulfuric Acid for Ethanol Production
Adsorptive Removal of Copper from Waste Water Using Biomass & Biochar Based Materials
Extraction of Essential Oil Form Sweet Lime Orange Peel: A Comparison Study
The Influencing Factors on the Production of Alcoholic Drinking from Jackfruit (Artocarpus heterophyllus L.)
Pomelo (Citrus grandis L.) Essential Oil Extraction: A Comparison between Hydrodistillation and Microwave Assisted Hydrodistillation
Polyphenol, Flavonoid Content and Antioxidant Activity of the Garlic (Allium sativum L.) Extract Obtained by Two Different Extraction Processes
Production Process of a Nutritional Drink from Mango (Mangifera indica)
Production Process of a Carbonated Drink from Red Flesh Dragon Fruit (Hylocereus polyrhizus)
The Initial Study on the Application of Sewage Sludge for Agriculture on the Laboratory Scale
Effects of Storage Conditions on Quality Change of Minimally Dried Jackfruit (Artocarpus heterophyllus Lam.) Bulbs
Chapter 1: Polymers and Composites
Contriving and Assessment of Magnesium Alloy Composites Augmented with Boron Carbide VIA Liquid Metallurgy Route
Production and Assessment of AZ91 Reinforced with Nano SiC through Stir Casting Process
Incorporation of Magnetite in Toughened PLA Nanocomposite: Tensile and Thermal Stability
Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites
Influence of Micro and Nano Particles on Mechanical Behaviour of Slag Reinforced AA7075 Composites
Microstructure Evaluation on Micro and Nano Slag Particles Reinforced AA7075 Composites
A Novel Method to Choose the Experimental Parameters in Large Amplitude Oscillatory Shear Rheology
Characterization and Comparison of Areca Sheath Ash (ASA) and Rice Husk Ash (RHA) for Silica Potential
Corrosion Resistance of Electroless Ni-P-W/ZrO2 Nanocomposite Coatings in Peracid Solutions
Chapter 2: Functional Materials
Thermal Conductivity Analysis of Ethylene Glycol/H2O- Based MgFe2O4 Ferrofluid
Study of Parameters Affecting the Aging of Transformer Oil
Influence of Nano Filler (ZrO2) on Optical and Thermal Studies of Potassium Doped Polyethylene Oxide Solid Polymer Electrolytes
Structural and Transport Properties of La0.85Te0.15MnO3 Manganite and its Composite with Al2O3
Microstructural Analysis of Copper Foil Etched and Annealed in ECR Plasma Reactor
EPR Study of CeO2 Nano Particles
Chapter 3: Materials for Microelectronics and Photovoltaics
Synthesis, Structural, Morphological and I-V Characteristics of Polyaniline-MgCl Composite
Analysis of InN/La2O3 Twosome for Double-Gate MOSFETs for Radio Frequency Applications
Ti Doped Cu2O Thin Films: DC Magnetron Sputtering and Structural and Optical Studies
Studies on Copper Nanometric-Film Deposited by an In-House Developed DC Magnetron Sputtering System
Numerical Investigation into Photovoltaic Performance of Organolead Trihalide Perovskite Quantum Dot Intermediate Band Solar Cell
Temperature Dependent Carrier Transport in Hydrogenated Amorphous Semiconductors for Thin Film Memristive Applications
Influence of Substrate Temperature on Structural and Optical Properties of Co-Evaporated Cu2SnS3/ITO Thin Films
Sol-Gel Processed ZrO2 Based Forming-Free Resistive Switching Memory Devices
Chapter 4: Physical Chemistry, Research and Computational Modelling
Conductivity Tensor in Cylindrical Quantum Wire with Parabolic Potential for the Case of Electron-Acoustic Phonon Scattering
Electronic Properties of Aldehyde Complexes Using DFT for Electrooptical Activity
Generalized Version of ISI Invariant for some Molecular Structures
Synthesis, Characterization and DFT Calculations of a Novel Pyrazole Derivative 4-(1-Phenyl-5-(p-Tolyl)-2,5-Dihydro-1H-Pyrazol-3-Yl)Benzo[c][1,2,5]Oxadiazole
Chapter 5: Materials Processing Technologies
Numerical Simulation of Friction Stir Spot Welding of Aluminium-6061 and Magnesium AZ-31B
Characterization of HVOF Sprayed Al2O3 - CeO2 Coatings Deposited on Mg Az 91 Alloy
WEDM Machining Performance of Al Based Metal Matrix Composites Reinforced with Rice Husk Ash
Numerical and Experimental Studies on Hydro-Forming of a Thin Metallic Disc
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
Impact of Cutting Parameters on Cutting Force of AISI 410 and AISI 420 MSS during CNC Dry Milling
A Comparative Experimental Study on Machining Performance of Aluminium against Advanced Diamond Coated Cutting Tool Inserts
Chapter 6: Building Materials and Structural Elements
Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio
Improving the Performance of Structural Members by Incorporating Incinerated Bio-Medical Waste Ash in Reinforced Geopolymer Concrete
Structural Behaviour of Green Geopolymer Concrete Beams and Columns Made with Waste Wood Ash a Partial Substitution Binder
Flexural Behaviour of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash and Glass Powder
A Comparative Investigation on Normal and High Strength Concrete Beams under Torsion
Modelling the Yield Stress of Fly-Ash Added Superplasticized Cement Paste at Different Temperatures Using Artificial Neural Network
Effective Utilization of Industrial and Agricultural Waste for Developing Sustainable Self-Compacting Concrete
Axial Compression Behaviour Analysis of Insulated Concrete Form (ICF) Wall Panel with Fibre Cement Board
Effect of Using Ground Granulated Blast Furnace Slag in Rigid Pavement Overlays
Effect of Flyash- Rice Husk Ash Blend in the Energy Efficient Geopolymer Tiles Using Industrial Wastes
Experimental Investigation on Fresh and Hardened Properties of High Calcium Flyash Based Geopolymer Concrete
Chapter 7: Phytochemistry and Pharmacology, Food and Biomass Processing
Traditional Peruvian Medicine: An Insight in Geophagy and Machu Rumi Intake
Preliminary Chemical, Total Phenolic Content, Flavonoid Content, and Antioxidant Activity of some Plants Used in Vietnam Folk Medicine
Mechanical Extraction of Neem Seed Kernel (Azadirachta indica A. Juss.) Harvesting in Ninh Thuan, Viet Nam by Using Hydraulic Pressing: Effect of Processing Parameters
Modelling of Liquid-Liquid Equilibria Using NRTL and UNIFAC Equations in the Extraction of Bio-Oil-Based Phenolics Produced from the Pyrolysis of Sugarcane Bagasse
Hydrolysis of S. platensis Using Sulfuric Acid for Ethanol Production
Adsorptive Removal of Copper from Waste Water Using Biomass & Biochar Based Materials
Extraction of Essential Oil Form Sweet Lime Orange Peel: A Comparison Study
The Influencing Factors on the Production of Alcoholic Drinking from Jackfruit (Artocarpus heterophyllus L.)
Pomelo (Citrus grandis L.) Essential Oil Extraction: A Comparison between Hydrodistillation and Microwave Assisted Hydrodistillation
Polyphenol, Flavonoid Content and Antioxidant Activity of the Garlic (Allium sativum L.) Extract Obtained by Two Different Extraction Processes
Production Process of a Nutritional Drink from Mango (Mangifera indica)
Production Process of a Carbonated Drink from Red Flesh Dragon Fruit (Hylocereus polyrhizus)
The Initial Study on the Application of Sewage Sludge for Agriculture on the Laboratory Scale
Effects of Storage Conditions on Quality Change of Minimally Dried Jackfruit (Artocarpus heterophyllus Lam.) Bulbs
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
3D Printing;Alloy;Biotechnology;Building Materials;Composite;Electrolyte;Electronic Properties;Food Processing;Friction Stir Spot Welding;Functional Materials;Hydro-Forming;Mechanical Properties;Metal Matrix Composite;Nanomaterial;Physical Chemistry
Preface
Chapter 1: Polymers and Composites
Contriving and Assessment of Magnesium Alloy Composites Augmented with Boron Carbide VIA Liquid Metallurgy Route
Production and Assessment of AZ91 Reinforced with Nano SiC through Stir Casting Process
Incorporation of Magnetite in Toughened PLA Nanocomposite: Tensile and Thermal Stability
Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites
Influence of Micro and Nano Particles on Mechanical Behaviour of Slag Reinforced AA7075 Composites
Microstructure Evaluation on Micro and Nano Slag Particles Reinforced AA7075 Composites
A Novel Method to Choose the Experimental Parameters in Large Amplitude Oscillatory Shear Rheology
Characterization and Comparison of Areca Sheath Ash (ASA) and Rice Husk Ash (RHA) for Silica Potential
Corrosion Resistance of Electroless Ni-P-W/ZrO2 Nanocomposite Coatings in Peracid Solutions
Chapter 2: Functional Materials
Thermal Conductivity Analysis of Ethylene Glycol/H2O- Based MgFe2O4 Ferrofluid
Study of Parameters Affecting the Aging of Transformer Oil
Influence of Nano Filler (ZrO2) on Optical and Thermal Studies of Potassium Doped Polyethylene Oxide Solid Polymer Electrolytes
Structural and Transport Properties of La0.85Te0.15MnO3 Manganite and its Composite with Al2O3
Microstructural Analysis of Copper Foil Etched and Annealed in ECR Plasma Reactor
EPR Study of CeO2 Nano Particles
Chapter 3: Materials for Microelectronics and Photovoltaics
Synthesis, Structural, Morphological and I-V Characteristics of Polyaniline-MgCl Composite
Analysis of InN/La2O3 Twosome for Double-Gate MOSFETs for Radio Frequency Applications
Ti Doped Cu2O Thin Films: DC Magnetron Sputtering and Structural and Optical Studies
Studies on Copper Nanometric-Film Deposited by an In-House Developed DC Magnetron Sputtering System
Numerical Investigation into Photovoltaic Performance of Organolead Trihalide Perovskite Quantum Dot Intermediate Band Solar Cell
Temperature Dependent Carrier Transport in Hydrogenated Amorphous Semiconductors for Thin Film Memristive Applications
Influence of Substrate Temperature on Structural and Optical Properties of Co-Evaporated Cu2SnS3/ITO Thin Films
Sol-Gel Processed ZrO2 Based Forming-Free Resistive Switching Memory Devices
Chapter 4: Physical Chemistry, Research and Computational Modelling
Conductivity Tensor in Cylindrical Quantum Wire with Parabolic Potential for the Case of Electron-Acoustic Phonon Scattering
Electronic Properties of Aldehyde Complexes Using DFT for Electrooptical Activity
Generalized Version of ISI Invariant for some Molecular Structures
Synthesis, Characterization and DFT Calculations of a Novel Pyrazole Derivative 4-(1-Phenyl-5-(p-Tolyl)-2,5-Dihydro-1H-Pyrazol-3-Yl)Benzo[c][1,2,5]Oxadiazole
Chapter 5: Materials Processing Technologies
Numerical Simulation of Friction Stir Spot Welding of Aluminium-6061 and Magnesium AZ-31B
Characterization of HVOF Sprayed Al2O3 - CeO2 Coatings Deposited on Mg Az 91 Alloy
WEDM Machining Performance of Al Based Metal Matrix Composites Reinforced with Rice Husk Ash
Numerical and Experimental Studies on Hydro-Forming of a Thin Metallic Disc
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
Impact of Cutting Parameters on Cutting Force of AISI 410 and AISI 420 MSS during CNC Dry Milling
A Comparative Experimental Study on Machining Performance of Aluminium against Advanced Diamond Coated Cutting Tool Inserts
Chapter 6: Building Materials and Structural Elements
Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio
Improving the Performance of Structural Members by Incorporating Incinerated Bio-Medical Waste Ash in Reinforced Geopolymer Concrete
Structural Behaviour of Green Geopolymer Concrete Beams and Columns Made with Waste Wood Ash a Partial Substitution Binder
Flexural Behaviour of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash and Glass Powder
A Comparative Investigation on Normal and High Strength Concrete Beams under Torsion
Modelling the Yield Stress of Fly-Ash Added Superplasticized Cement Paste at Different Temperatures Using Artificial Neural Network
Effective Utilization of Industrial and Agricultural Waste for Developing Sustainable Self-Compacting Concrete
Axial Compression Behaviour Analysis of Insulated Concrete Form (ICF) Wall Panel with Fibre Cement Board
Effect of Using Ground Granulated Blast Furnace Slag in Rigid Pavement Overlays
Effect of Flyash- Rice Husk Ash Blend in the Energy Efficient Geopolymer Tiles Using Industrial Wastes
Experimental Investigation on Fresh and Hardened Properties of High Calcium Flyash Based Geopolymer Concrete
Chapter 7: Phytochemistry and Pharmacology, Food and Biomass Processing
Traditional Peruvian Medicine: An Insight in Geophagy and Machu Rumi Intake
Preliminary Chemical, Total Phenolic Content, Flavonoid Content, and Antioxidant Activity of some Plants Used in Vietnam Folk Medicine
Mechanical Extraction of Neem Seed Kernel (Azadirachta indica A. Juss.) Harvesting in Ninh Thuan, Viet Nam by Using Hydraulic Pressing: Effect of Processing Parameters
Modelling of Liquid-Liquid Equilibria Using NRTL and UNIFAC Equations in the Extraction of Bio-Oil-Based Phenolics Produced from the Pyrolysis of Sugarcane Bagasse
Hydrolysis of S. platensis Using Sulfuric Acid for Ethanol Production
Adsorptive Removal of Copper from Waste Water Using Biomass & Biochar Based Materials
Extraction of Essential Oil Form Sweet Lime Orange Peel: A Comparison Study
The Influencing Factors on the Production of Alcoholic Drinking from Jackfruit (Artocarpus heterophyllus L.)
Pomelo (Citrus grandis L.) Essential Oil Extraction: A Comparison between Hydrodistillation and Microwave Assisted Hydrodistillation
Polyphenol, Flavonoid Content and Antioxidant Activity of the Garlic (Allium sativum L.) Extract Obtained by Two Different Extraction Processes
Production Process of a Nutritional Drink from Mango (Mangifera indica)
Production Process of a Carbonated Drink from Red Flesh Dragon Fruit (Hylocereus polyrhizus)
The Initial Study on the Application of Sewage Sludge for Agriculture on the Laboratory Scale
Effects of Storage Conditions on Quality Change of Minimally Dried Jackfruit (Artocarpus heterophyllus Lam.) Bulbs
Chapter 1: Polymers and Composites
Contriving and Assessment of Magnesium Alloy Composites Augmented with Boron Carbide VIA Liquid Metallurgy Route
Production and Assessment of AZ91 Reinforced with Nano SiC through Stir Casting Process
Incorporation of Magnetite in Toughened PLA Nanocomposite: Tensile and Thermal Stability
Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites
Influence of Micro and Nano Particles on Mechanical Behaviour of Slag Reinforced AA7075 Composites
Microstructure Evaluation on Micro and Nano Slag Particles Reinforced AA7075 Composites
A Novel Method to Choose the Experimental Parameters in Large Amplitude Oscillatory Shear Rheology
Characterization and Comparison of Areca Sheath Ash (ASA) and Rice Husk Ash (RHA) for Silica Potential
Corrosion Resistance of Electroless Ni-P-W/ZrO2 Nanocomposite Coatings in Peracid Solutions
Chapter 2: Functional Materials
Thermal Conductivity Analysis of Ethylene Glycol/H2O- Based MgFe2O4 Ferrofluid
Study of Parameters Affecting the Aging of Transformer Oil
Influence of Nano Filler (ZrO2) on Optical and Thermal Studies of Potassium Doped Polyethylene Oxide Solid Polymer Electrolytes
Structural and Transport Properties of La0.85Te0.15MnO3 Manganite and its Composite with Al2O3
Microstructural Analysis of Copper Foil Etched and Annealed in ECR Plasma Reactor
EPR Study of CeO2 Nano Particles
Chapter 3: Materials for Microelectronics and Photovoltaics
Synthesis, Structural, Morphological and I-V Characteristics of Polyaniline-MgCl Composite
Analysis of InN/La2O3 Twosome for Double-Gate MOSFETs for Radio Frequency Applications
Ti Doped Cu2O Thin Films: DC Magnetron Sputtering and Structural and Optical Studies
Studies on Copper Nanometric-Film Deposited by an In-House Developed DC Magnetron Sputtering System
Numerical Investigation into Photovoltaic Performance of Organolead Trihalide Perovskite Quantum Dot Intermediate Band Solar Cell
Temperature Dependent Carrier Transport in Hydrogenated Amorphous Semiconductors for Thin Film Memristive Applications
Influence of Substrate Temperature on Structural and Optical Properties of Co-Evaporated Cu2SnS3/ITO Thin Films
Sol-Gel Processed ZrO2 Based Forming-Free Resistive Switching Memory Devices
Chapter 4: Physical Chemistry, Research and Computational Modelling
Conductivity Tensor in Cylindrical Quantum Wire with Parabolic Potential for the Case of Electron-Acoustic Phonon Scattering
Electronic Properties of Aldehyde Complexes Using DFT for Electrooptical Activity
Generalized Version of ISI Invariant for some Molecular Structures
Synthesis, Characterization and DFT Calculations of a Novel Pyrazole Derivative 4-(1-Phenyl-5-(p-Tolyl)-2,5-Dihydro-1H-Pyrazol-3-Yl)Benzo[c][1,2,5]Oxadiazole
Chapter 5: Materials Processing Technologies
Numerical Simulation of Friction Stir Spot Welding of Aluminium-6061 and Magnesium AZ-31B
Characterization of HVOF Sprayed Al2O3 - CeO2 Coatings Deposited on Mg Az 91 Alloy
WEDM Machining Performance of Al Based Metal Matrix Composites Reinforced with Rice Husk Ash
Numerical and Experimental Studies on Hydro-Forming of a Thin Metallic Disc
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
Impact of Cutting Parameters on Cutting Force of AISI 410 and AISI 420 MSS during CNC Dry Milling
A Comparative Experimental Study on Machining Performance of Aluminium against Advanced Diamond Coated Cutting Tool Inserts
Chapter 6: Building Materials and Structural Elements
Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio
Improving the Performance of Structural Members by Incorporating Incinerated Bio-Medical Waste Ash in Reinforced Geopolymer Concrete
Structural Behaviour of Green Geopolymer Concrete Beams and Columns Made with Waste Wood Ash a Partial Substitution Binder
Flexural Behaviour of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash and Glass Powder
A Comparative Investigation on Normal and High Strength Concrete Beams under Torsion
Modelling the Yield Stress of Fly-Ash Added Superplasticized Cement Paste at Different Temperatures Using Artificial Neural Network
Effective Utilization of Industrial and Agricultural Waste for Developing Sustainable Self-Compacting Concrete
Axial Compression Behaviour Analysis of Insulated Concrete Form (ICF) Wall Panel with Fibre Cement Board
Effect of Using Ground Granulated Blast Furnace Slag in Rigid Pavement Overlays
Effect of Flyash- Rice Husk Ash Blend in the Energy Efficient Geopolymer Tiles Using Industrial Wastes
Experimental Investigation on Fresh and Hardened Properties of High Calcium Flyash Based Geopolymer Concrete
Chapter 7: Phytochemistry and Pharmacology, Food and Biomass Processing
Traditional Peruvian Medicine: An Insight in Geophagy and Machu Rumi Intake
Preliminary Chemical, Total Phenolic Content, Flavonoid Content, and Antioxidant Activity of some Plants Used in Vietnam Folk Medicine
Mechanical Extraction of Neem Seed Kernel (Azadirachta indica A. Juss.) Harvesting in Ninh Thuan, Viet Nam by Using Hydraulic Pressing: Effect of Processing Parameters
Modelling of Liquid-Liquid Equilibria Using NRTL and UNIFAC Equations in the Extraction of Bio-Oil-Based Phenolics Produced from the Pyrolysis of Sugarcane Bagasse
Hydrolysis of S. platensis Using Sulfuric Acid for Ethanol Production
Adsorptive Removal of Copper from Waste Water Using Biomass & Biochar Based Materials
Extraction of Essential Oil Form Sweet Lime Orange Peel: A Comparison Study
The Influencing Factors on the Production of Alcoholic Drinking from Jackfruit (Artocarpus heterophyllus L.)
Pomelo (Citrus grandis L.) Essential Oil Extraction: A Comparison between Hydrodistillation and Microwave Assisted Hydrodistillation
Polyphenol, Flavonoid Content and Antioxidant Activity of the Garlic (Allium sativum L.) Extract Obtained by Two Different Extraction Processes
Production Process of a Nutritional Drink from Mango (Mangifera indica)
Production Process of a Carbonated Drink from Red Flesh Dragon Fruit (Hylocereus polyrhizus)
The Initial Study on the Application of Sewage Sludge for Agriculture on the Laboratory Scale
Effects of Storage Conditions on Quality Change of Minimally Dried Jackfruit (Artocarpus heterophyllus Lam.) Bulbs
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
