Materials Engineering and Modern Manufacturing
portes grátis
Materials Engineering and Modern Manufacturing
Bendikiene, Regita; Juzenas, Kazimieras
Trans Tech Publications Ltd
07/2021
218
Mole
Inglês
9783035717648
15 a 20 dias
510
Descrição não disponível.
Preface
Chapter 1: Functional Materials
Strength and Deformability of Hollow Thin-Walled Mini-Spheres
Analysis of the Effects of Dynamic Alloying on the Structure of Aluminium and its Alloys
Comparison of Stress-Strain States of Rail-Wheel Pair Made of Steel and MoNiCa
Development of Electromagnetic Shielding Material Based on Devulcanised Crumb Rubber
Chapter 2: Coatings, Surface Engineering and Tribology
Microstructure and Oxidation Resistance of Thermal Barrier Coatings with Different Ceramic Layer
Nanostructured TiAlSi-CN:Me/a-CN:Si3N4 Composite Coatings Deposited by Advanced PVD Technique
The Duplex Coating Formation Using Plasma Nitriding and CrN PVD Deposition on X39CrMo17-1 Stainless Steel
The Formation of Columnar YSZ Ceramic Layer on Graphite by PS-PVD Method for Metallurgical Applications
The Influence of Process Parameters on Structure and Phase Composition of Boride Coatings Obtained on X39CrMo17-1 Stainless Steel
Thermal Barrier Coating Deposited Using the PS-PVD Method on TiAl-Nb-Mo Intermetallic Alloy with Different Types of Bond Coats
Determining High-Temperature Oxidation Resistance of (TI-Al-X-N) Based Coatings for Titanium Alloys
Deposition of YSZ Layer by PS-PVD on Different Materials
Evaluation of Photoinitiator and Fluorescent Pigments Impact on Color Stability in Pigmented UV-Curable Coatings
Comparative Study of Plasma Cladded Fe-Based Composite Hardfacings with In Situ Synthesized Cr and Ti Carbide Reinforcement
Some Regularities of Life Time and Damage for the New Structural Material MoNiCa during Sliding Friction and Mechano-Sliding Fatigue
Tribological and Mechanical Properties Investigations of Post-Consumer Cotton Textiles
Time and Costs Optimized Performance Evaluation Tests of Alternative Shaft-Bushing Concepts
Chapter 5: Polymers and Composites
Chemical Bonded Oil-PTFE-PA66 Composites as Novel Tribologically Effective Materials: Part 1
Some Exploitation Properties of Wood Plastic Composites Based on Mixtures of Virgin and Recycled High Density Polyethylenes and Birch Plywood Sanding Dust
Effect of Wood Flour Addition on Warm/Cool Feeling of Green Composite
Optimal Use of Industrial Hemp for PLA Biocomposite and LLDPE Composite Reinforcement
The Influence of Heating Time on the Mechanical Properties of Laser Through-Transmission Welded Polyamide PPA40GF Joint
Wear Behavior of Ceramic-Metal Composites as Tool Material for FSW of Copper
Evaluation of Reactive Diluent Impact on Stability of Systems Viscosity in UV-Curable Compositions
Sandwich Panels Made of Perforated Metal Materials
An Effectiveness Improvement of the Pultrusion Process for a Production of Thin-Walled Rectangular Profile
Chapter 6: Building Materials
Heat Conductive Plates from Recycled Niobium Slag
Ultrafine Cemented Carbides with Cobalt and Iron Binders Prepared via Reactive In Situ Sintering
Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials
Development of High-Strength Foamed Concrete Compositions
Chapter 3: Chemical Technologies
Catalytic Activity of Char Obtained from Fast Pyrolysis in Esterification Reactions
Hybrid Pigments Based on Montmorillonite and Anionic Dyes for Leather Finishing
Chapter 1: Functional Materials
Strength and Deformability of Hollow Thin-Walled Mini-Spheres
Analysis of the Effects of Dynamic Alloying on the Structure of Aluminium and its Alloys
Comparison of Stress-Strain States of Rail-Wheel Pair Made of Steel and MoNiCa
Development of Electromagnetic Shielding Material Based on Devulcanised Crumb Rubber
Chapter 2: Coatings, Surface Engineering and Tribology
Microstructure and Oxidation Resistance of Thermal Barrier Coatings with Different Ceramic Layer
Nanostructured TiAlSi-CN:Me/a-CN:Si3N4 Composite Coatings Deposited by Advanced PVD Technique
The Duplex Coating Formation Using Plasma Nitriding and CrN PVD Deposition on X39CrMo17-1 Stainless Steel
The Formation of Columnar YSZ Ceramic Layer on Graphite by PS-PVD Method for Metallurgical Applications
The Influence of Process Parameters on Structure and Phase Composition of Boride Coatings Obtained on X39CrMo17-1 Stainless Steel
Thermal Barrier Coating Deposited Using the PS-PVD Method on TiAl-Nb-Mo Intermetallic Alloy with Different Types of Bond Coats
Determining High-Temperature Oxidation Resistance of (TI-Al-X-N) Based Coatings for Titanium Alloys
Deposition of YSZ Layer by PS-PVD on Different Materials
Evaluation of Photoinitiator and Fluorescent Pigments Impact on Color Stability in Pigmented UV-Curable Coatings
Comparative Study of Plasma Cladded Fe-Based Composite Hardfacings with In Situ Synthesized Cr and Ti Carbide Reinforcement
Some Regularities of Life Time and Damage for the New Structural Material MoNiCa during Sliding Friction and Mechano-Sliding Fatigue
Tribological and Mechanical Properties Investigations of Post-Consumer Cotton Textiles
Time and Costs Optimized Performance Evaluation Tests of Alternative Shaft-Bushing Concepts
Chapter 5: Polymers and Composites
Chemical Bonded Oil-PTFE-PA66 Composites as Novel Tribologically Effective Materials: Part 1
Some Exploitation Properties of Wood Plastic Composites Based on Mixtures of Virgin and Recycled High Density Polyethylenes and Birch Plywood Sanding Dust
Effect of Wood Flour Addition on Warm/Cool Feeling of Green Composite
Optimal Use of Industrial Hemp for PLA Biocomposite and LLDPE Composite Reinforcement
The Influence of Heating Time on the Mechanical Properties of Laser Through-Transmission Welded Polyamide PPA40GF Joint
Wear Behavior of Ceramic-Metal Composites as Tool Material for FSW of Copper
Evaluation of Reactive Diluent Impact on Stability of Systems Viscosity in UV-Curable Compositions
Sandwich Panels Made of Perforated Metal Materials
An Effectiveness Improvement of the Pultrusion Process for a Production of Thin-Walled Rectangular Profile
Chapter 6: Building Materials
Heat Conductive Plates from Recycled Niobium Slag
Ultrafine Cemented Carbides with Cobalt and Iron Binders Prepared via Reactive In Situ Sintering
Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials
Development of High-Strength Foamed Concrete Compositions
Chapter 3: Chemical Technologies
Catalytic Activity of Char Obtained from Fast Pyrolysis in Esterification Reactions
Hybrid Pigments Based on Montmorillonite and Anionic Dyes for Leather Finishing
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Buildings Materials;Ceramics;Chemical Technologies;Coating;Composite;Fibre;Functional Materials;Hardfacing;Machining;Mechanical Properties;Metal;Polymer;Tribology;Wood
Preface
Chapter 1: Functional Materials
Strength and Deformability of Hollow Thin-Walled Mini-Spheres
Analysis of the Effects of Dynamic Alloying on the Structure of Aluminium and its Alloys
Comparison of Stress-Strain States of Rail-Wheel Pair Made of Steel and MoNiCa
Development of Electromagnetic Shielding Material Based on Devulcanised Crumb Rubber
Chapter 2: Coatings, Surface Engineering and Tribology
Microstructure and Oxidation Resistance of Thermal Barrier Coatings with Different Ceramic Layer
Nanostructured TiAlSi-CN:Me/a-CN:Si3N4 Composite Coatings Deposited by Advanced PVD Technique
The Duplex Coating Formation Using Plasma Nitriding and CrN PVD Deposition on X39CrMo17-1 Stainless Steel
The Formation of Columnar YSZ Ceramic Layer on Graphite by PS-PVD Method for Metallurgical Applications
The Influence of Process Parameters on Structure and Phase Composition of Boride Coatings Obtained on X39CrMo17-1 Stainless Steel
Thermal Barrier Coating Deposited Using the PS-PVD Method on TiAl-Nb-Mo Intermetallic Alloy with Different Types of Bond Coats
Determining High-Temperature Oxidation Resistance of (TI-Al-X-N) Based Coatings for Titanium Alloys
Deposition of YSZ Layer by PS-PVD on Different Materials
Evaluation of Photoinitiator and Fluorescent Pigments Impact on Color Stability in Pigmented UV-Curable Coatings
Comparative Study of Plasma Cladded Fe-Based Composite Hardfacings with In Situ Synthesized Cr and Ti Carbide Reinforcement
Some Regularities of Life Time and Damage for the New Structural Material MoNiCa during Sliding Friction and Mechano-Sliding Fatigue
Tribological and Mechanical Properties Investigations of Post-Consumer Cotton Textiles
Time and Costs Optimized Performance Evaluation Tests of Alternative Shaft-Bushing Concepts
Chapter 5: Polymers and Composites
Chemical Bonded Oil-PTFE-PA66 Composites as Novel Tribologically Effective Materials: Part 1
Some Exploitation Properties of Wood Plastic Composites Based on Mixtures of Virgin and Recycled High Density Polyethylenes and Birch Plywood Sanding Dust
Effect of Wood Flour Addition on Warm/Cool Feeling of Green Composite
Optimal Use of Industrial Hemp for PLA Biocomposite and LLDPE Composite Reinforcement
The Influence of Heating Time on the Mechanical Properties of Laser Through-Transmission Welded Polyamide PPA40GF Joint
Wear Behavior of Ceramic-Metal Composites as Tool Material for FSW of Copper
Evaluation of Reactive Diluent Impact on Stability of Systems Viscosity in UV-Curable Compositions
Sandwich Panels Made of Perforated Metal Materials
An Effectiveness Improvement of the Pultrusion Process for a Production of Thin-Walled Rectangular Profile
Chapter 6: Building Materials
Heat Conductive Plates from Recycled Niobium Slag
Ultrafine Cemented Carbides with Cobalt and Iron Binders Prepared via Reactive In Situ Sintering
Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials
Development of High-Strength Foamed Concrete Compositions
Chapter 3: Chemical Technologies
Catalytic Activity of Char Obtained from Fast Pyrolysis in Esterification Reactions
Hybrid Pigments Based on Montmorillonite and Anionic Dyes for Leather Finishing
Chapter 1: Functional Materials
Strength and Deformability of Hollow Thin-Walled Mini-Spheres
Analysis of the Effects of Dynamic Alloying on the Structure of Aluminium and its Alloys
Comparison of Stress-Strain States of Rail-Wheel Pair Made of Steel and MoNiCa
Development of Electromagnetic Shielding Material Based on Devulcanised Crumb Rubber
Chapter 2: Coatings, Surface Engineering and Tribology
Microstructure and Oxidation Resistance of Thermal Barrier Coatings with Different Ceramic Layer
Nanostructured TiAlSi-CN:Me/a-CN:Si3N4 Composite Coatings Deposited by Advanced PVD Technique
The Duplex Coating Formation Using Plasma Nitriding and CrN PVD Deposition on X39CrMo17-1 Stainless Steel
The Formation of Columnar YSZ Ceramic Layer on Graphite by PS-PVD Method for Metallurgical Applications
The Influence of Process Parameters on Structure and Phase Composition of Boride Coatings Obtained on X39CrMo17-1 Stainless Steel
Thermal Barrier Coating Deposited Using the PS-PVD Method on TiAl-Nb-Mo Intermetallic Alloy with Different Types of Bond Coats
Determining High-Temperature Oxidation Resistance of (TI-Al-X-N) Based Coatings for Titanium Alloys
Deposition of YSZ Layer by PS-PVD on Different Materials
Evaluation of Photoinitiator and Fluorescent Pigments Impact on Color Stability in Pigmented UV-Curable Coatings
Comparative Study of Plasma Cladded Fe-Based Composite Hardfacings with In Situ Synthesized Cr and Ti Carbide Reinforcement
Some Regularities of Life Time and Damage for the New Structural Material MoNiCa during Sliding Friction and Mechano-Sliding Fatigue
Tribological and Mechanical Properties Investigations of Post-Consumer Cotton Textiles
Time and Costs Optimized Performance Evaluation Tests of Alternative Shaft-Bushing Concepts
Chapter 5: Polymers and Composites
Chemical Bonded Oil-PTFE-PA66 Composites as Novel Tribologically Effective Materials: Part 1
Some Exploitation Properties of Wood Plastic Composites Based on Mixtures of Virgin and Recycled High Density Polyethylenes and Birch Plywood Sanding Dust
Effect of Wood Flour Addition on Warm/Cool Feeling of Green Composite
Optimal Use of Industrial Hemp for PLA Biocomposite and LLDPE Composite Reinforcement
The Influence of Heating Time on the Mechanical Properties of Laser Through-Transmission Welded Polyamide PPA40GF Joint
Wear Behavior of Ceramic-Metal Composites as Tool Material for FSW of Copper
Evaluation of Reactive Diluent Impact on Stability of Systems Viscosity in UV-Curable Compositions
Sandwich Panels Made of Perforated Metal Materials
An Effectiveness Improvement of the Pultrusion Process for a Production of Thin-Walled Rectangular Profile
Chapter 6: Building Materials
Heat Conductive Plates from Recycled Niobium Slag
Ultrafine Cemented Carbides with Cobalt and Iron Binders Prepared via Reactive In Situ Sintering
Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials
Development of High-Strength Foamed Concrete Compositions
Chapter 3: Chemical Technologies
Catalytic Activity of Char Obtained from Fast Pyrolysis in Esterification Reactions
Hybrid Pigments Based on Montmorillonite and Anionic Dyes for Leather Finishing
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
