Industrial Science and Technology III
portes grátis
Industrial Science and Technology III
Kabeb, Siti Maznah; Sutjipto, Agus Geter Edy; Salim, Nurjannah; Abu Bakar, Nurul Huda
Trans Tech Publications Ltd
04/2022
212
Mole
Inglês
9783035716498
15 a 20 dias
500
Descrição não disponível.
Preface
Chapter 1: Polymers and Composites
The Effects of Alkaline Treatment on Physical and Mechanical Properties of Oil Palm Trunk/Polypropylene Blends Composite
Bending Performance of Aluminum Sandwich Panel with Polyurethane Foam Core
Experimental and Simulation of Supercritical Carbon Dioxide PLA Biocomposite Foamed
Chapter 2: Materials for Electronics and Energy Storage
Voltage Mediated Control of Fluorescence Protein Emissions at the Metal-Solution Interface
Multiwall Carbon Nanotubes Based Triboelectric Nanogenerators
Optical and Electrical Modeling of DSSC with Light Scattering Layer
Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications
Chapter 3: Building Materials
Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement
A Review: Utilization of Waste Materials in Concrete
The Effect of Density and Resin Content on Oil Palm Trunk Particleboard
A Review on Structural Performance of Bamboo Reinforced Concrete
Strengthening of Reinforced Concrete with Steel Fibre: A Review
Review of Mechanical Performance of Oil Palm Fiber and Coconut Fiber as an Additional Material in Concrete
Chapter 4: Materials and Technologies for Environmental Engineering
Structural and Magnetic Characteristics Evaluation of Iron Oxide Extracted from Printer Toner Wastes
Crude Oil Extraction and Technologically-Enhanced Naturally Occurring Radioactive Materials (TENORM) Pre-Treatment of Petroleum Sludge: A Review
Carbon Quantum Dots (CQDs) Based Composites Photocatalyst for Wastewater Purification
Ag/RGO Photocatalyst for Methyl Orange Treatment
Comparison of Using Electrospun Polystyrene, Polysulfone, and Polyvinylidene Fluoride Mixed with N, N-Dimethylformamide on Oil Sorption from Water
Study on the Development of Ceramic Ball Based on Selendang Clay
Chapter 5: Membranes and Membrane Technologies
Development of Carbon Nanotubes (CNTs) Membrane from Waste Plastic: Towards Waste to Wealth for Water Treatment
Surface Modification of PVDF Membrane Using Formic Acid for Enhance the Hydrophobicity for Desalination
Oil Palm Empty Bunches Adsorber Membrane for CO2 Reduction of Biogas TPA Gunung Kupang in South Borneo
Chapter 6: Biotechnologies and Pharmacology
Optimisation of Characteristics of CHI-ALG-CaCl2 Nanocarriers Loaded with Non-Volatile Extracts of CymbopogonSp.
Prediction on Mechanism Design of Molecularly Imprinted Polymer Synthesis Using Oleic Acid as a Template
Water Holding and Release Properties of Bacterial Cellulose Produced from Oil Palm Frond Juice
Enhancement of Fermentable Sugars Obtained from Amorphophallus Spp. Tuber for Bioethanol Production by Optimizing Temperature and Pretreatment Concentration
Synthesis of Imidazolium Hydrogen Sulphate and Morpholinium Tetrafluoroborate Ionic Liquids: Its Antimicrobial Activity
Chapter 1: Polymers and Composites
The Effects of Alkaline Treatment on Physical and Mechanical Properties of Oil Palm Trunk/Polypropylene Blends Composite
Bending Performance of Aluminum Sandwich Panel with Polyurethane Foam Core
Experimental and Simulation of Supercritical Carbon Dioxide PLA Biocomposite Foamed
Chapter 2: Materials for Electronics and Energy Storage
Voltage Mediated Control of Fluorescence Protein Emissions at the Metal-Solution Interface
Multiwall Carbon Nanotubes Based Triboelectric Nanogenerators
Optical and Electrical Modeling of DSSC with Light Scattering Layer
Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications
Chapter 3: Building Materials
Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement
A Review: Utilization of Waste Materials in Concrete
The Effect of Density and Resin Content on Oil Palm Trunk Particleboard
A Review on Structural Performance of Bamboo Reinforced Concrete
Strengthening of Reinforced Concrete with Steel Fibre: A Review
Review of Mechanical Performance of Oil Palm Fiber and Coconut Fiber as an Additional Material in Concrete
Chapter 4: Materials and Technologies for Environmental Engineering
Structural and Magnetic Characteristics Evaluation of Iron Oxide Extracted from Printer Toner Wastes
Crude Oil Extraction and Technologically-Enhanced Naturally Occurring Radioactive Materials (TENORM) Pre-Treatment of Petroleum Sludge: A Review
Carbon Quantum Dots (CQDs) Based Composites Photocatalyst for Wastewater Purification
Ag/RGO Photocatalyst for Methyl Orange Treatment
Comparison of Using Electrospun Polystyrene, Polysulfone, and Polyvinylidene Fluoride Mixed with N, N-Dimethylformamide on Oil Sorption from Water
Study on the Development of Ceramic Ball Based on Selendang Clay
Chapter 5: Membranes and Membrane Technologies
Development of Carbon Nanotubes (CNTs) Membrane from Waste Plastic: Towards Waste to Wealth for Water Treatment
Surface Modification of PVDF Membrane Using Formic Acid for Enhance the Hydrophobicity for Desalination
Oil Palm Empty Bunches Adsorber Membrane for CO2 Reduction of Biogas TPA Gunung Kupang in South Borneo
Chapter 6: Biotechnologies and Pharmacology
Optimisation of Characteristics of CHI-ALG-CaCl2 Nanocarriers Loaded with Non-Volatile Extracts of CymbopogonSp.
Prediction on Mechanism Design of Molecularly Imprinted Polymer Synthesis Using Oleic Acid as a Template
Water Holding and Release Properties of Bacterial Cellulose Produced from Oil Palm Frond Juice
Enhancement of Fermentable Sugars Obtained from Amorphophallus Spp. Tuber for Bioethanol Production by Optimizing Temperature and Pretreatment Concentration
Synthesis of Imidazolium Hydrogen Sulphate and Morpholinium Tetrafluoroborate Ionic Liquids: Its Antimicrobial Activity
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Biotechnology;Building Materials;Composite;Membrane;Membrane Technology;Nanotube;Pharmacology;Polymer;Solar Cell;Waste Recycling;Wastewater Purification;Water Treatment
Preface
Chapter 1: Polymers and Composites
The Effects of Alkaline Treatment on Physical and Mechanical Properties of Oil Palm Trunk/Polypropylene Blends Composite
Bending Performance of Aluminum Sandwich Panel with Polyurethane Foam Core
Experimental and Simulation of Supercritical Carbon Dioxide PLA Biocomposite Foamed
Chapter 2: Materials for Electronics and Energy Storage
Voltage Mediated Control of Fluorescence Protein Emissions at the Metal-Solution Interface
Multiwall Carbon Nanotubes Based Triboelectric Nanogenerators
Optical and Electrical Modeling of DSSC with Light Scattering Layer
Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications
Chapter 3: Building Materials
Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement
A Review: Utilization of Waste Materials in Concrete
The Effect of Density and Resin Content on Oil Palm Trunk Particleboard
A Review on Structural Performance of Bamboo Reinforced Concrete
Strengthening of Reinforced Concrete with Steel Fibre: A Review
Review of Mechanical Performance of Oil Palm Fiber and Coconut Fiber as an Additional Material in Concrete
Chapter 4: Materials and Technologies for Environmental Engineering
Structural and Magnetic Characteristics Evaluation of Iron Oxide Extracted from Printer Toner Wastes
Crude Oil Extraction and Technologically-Enhanced Naturally Occurring Radioactive Materials (TENORM) Pre-Treatment of Petroleum Sludge: A Review
Carbon Quantum Dots (CQDs) Based Composites Photocatalyst for Wastewater Purification
Ag/RGO Photocatalyst for Methyl Orange Treatment
Comparison of Using Electrospun Polystyrene, Polysulfone, and Polyvinylidene Fluoride Mixed with N, N-Dimethylformamide on Oil Sorption from Water
Study on the Development of Ceramic Ball Based on Selendang Clay
Chapter 5: Membranes and Membrane Technologies
Development of Carbon Nanotubes (CNTs) Membrane from Waste Plastic: Towards Waste to Wealth for Water Treatment
Surface Modification of PVDF Membrane Using Formic Acid for Enhance the Hydrophobicity for Desalination
Oil Palm Empty Bunches Adsorber Membrane for CO2 Reduction of Biogas TPA Gunung Kupang in South Borneo
Chapter 6: Biotechnologies and Pharmacology
Optimisation of Characteristics of CHI-ALG-CaCl2 Nanocarriers Loaded with Non-Volatile Extracts of CymbopogonSp.
Prediction on Mechanism Design of Molecularly Imprinted Polymer Synthesis Using Oleic Acid as a Template
Water Holding and Release Properties of Bacterial Cellulose Produced from Oil Palm Frond Juice
Enhancement of Fermentable Sugars Obtained from Amorphophallus Spp. Tuber for Bioethanol Production by Optimizing Temperature and Pretreatment Concentration
Synthesis of Imidazolium Hydrogen Sulphate and Morpholinium Tetrafluoroborate Ionic Liquids: Its Antimicrobial Activity
Chapter 1: Polymers and Composites
The Effects of Alkaline Treatment on Physical and Mechanical Properties of Oil Palm Trunk/Polypropylene Blends Composite
Bending Performance of Aluminum Sandwich Panel with Polyurethane Foam Core
Experimental and Simulation of Supercritical Carbon Dioxide PLA Biocomposite Foamed
Chapter 2: Materials for Electronics and Energy Storage
Voltage Mediated Control of Fluorescence Protein Emissions at the Metal-Solution Interface
Multiwall Carbon Nanotubes Based Triboelectric Nanogenerators
Optical and Electrical Modeling of DSSC with Light Scattering Layer
Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications
Chapter 3: Building Materials
Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement
A Review: Utilization of Waste Materials in Concrete
The Effect of Density and Resin Content on Oil Palm Trunk Particleboard
A Review on Structural Performance of Bamboo Reinforced Concrete
Strengthening of Reinforced Concrete with Steel Fibre: A Review
Review of Mechanical Performance of Oil Palm Fiber and Coconut Fiber as an Additional Material in Concrete
Chapter 4: Materials and Technologies for Environmental Engineering
Structural and Magnetic Characteristics Evaluation of Iron Oxide Extracted from Printer Toner Wastes
Crude Oil Extraction and Technologically-Enhanced Naturally Occurring Radioactive Materials (TENORM) Pre-Treatment of Petroleum Sludge: A Review
Carbon Quantum Dots (CQDs) Based Composites Photocatalyst for Wastewater Purification
Ag/RGO Photocatalyst for Methyl Orange Treatment
Comparison of Using Electrospun Polystyrene, Polysulfone, and Polyvinylidene Fluoride Mixed with N, N-Dimethylformamide on Oil Sorption from Water
Study on the Development of Ceramic Ball Based on Selendang Clay
Chapter 5: Membranes and Membrane Technologies
Development of Carbon Nanotubes (CNTs) Membrane from Waste Plastic: Towards Waste to Wealth for Water Treatment
Surface Modification of PVDF Membrane Using Formic Acid for Enhance the Hydrophobicity for Desalination
Oil Palm Empty Bunches Adsorber Membrane for CO2 Reduction of Biogas TPA Gunung Kupang in South Borneo
Chapter 6: Biotechnologies and Pharmacology
Optimisation of Characteristics of CHI-ALG-CaCl2 Nanocarriers Loaded with Non-Volatile Extracts of CymbopogonSp.
Prediction on Mechanism Design of Molecularly Imprinted Polymer Synthesis Using Oleic Acid as a Template
Water Holding and Release Properties of Bacterial Cellulose Produced from Oil Palm Frond Juice
Enhancement of Fermentable Sugars Obtained from Amorphophallus Spp. Tuber for Bioethanol Production by Optimizing Temperature and Pretreatment Concentration
Synthesis of Imidazolium Hydrogen Sulphate and Morpholinium Tetrafluoroborate Ionic Liquids: Its Antimicrobial Activity
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
