Current Materials Research Using X-Rays and Related Techniques III

Preface
Chapter 1: Polymers and Composites
Prediction and Optimization on Tribological Behaviour of Kenaf/Carbon Fiber Reinforced Epoxy Matrix Hybrid Composites
The Effect of Graphite Loading as Reinforcement on Carbon Foam from Natural Resources
Synthesis and Characterization of Palm Kernel Oil Polyol Based Shape Memory Polyurethane: Effect of Different Diisocyanates
Characterization of Sodium Alginate Membrane Plasticized by Polyols and Polyamine for DMFC Applications
Effect of Chemical Treatment on Mechanical and Morphological Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composite
Effect of Graphene on Mechanical and Morphological Properties of Coconut Shell Reinforced Unsaturated Polyester Composite
UV Radiation Crosslinking of Acrylated Palm Olein (APO) Copolymer Resins for 3D Printing
Surface Analysis of Grafted Low Density Polyethylene Film by FTIR and XPS Spectroscopy
Box Behnken Design to Optimize Parameter for Vapor Grafting of Cinnamaldehyde Essential Oil onto Polyvinyl Alcohol
Radiation Modification of Commercial Polyvinylidene Fluoride (PVDF) Backsheet Film for Mechanical and Thermal Properties Enhancement
Physiochemical Properties of Biofilm from Dioscorea hispida Starch Blended with Glycerol Extracted from Recycling Cooking
Crystallinity of Nanocellulose and its Application in Polymer Composites: A Short Review
Characterization of Thin Film PLA/PBAT Reinforced with Microcrystalline Cellulose Derived from Gigantochloa albociliata
Study on Composition of Rice Husk Silica Reinforcement to Hardness and Microstructure of Recycling Milled AA7075

Tectona grandis: Examine an Ultrastructure on Cultivated Teakwood due to the Scanning Electron Microscopy Enhanced by Heat Treatment
Correlation of Humidity and Mechanical Properties of Different Grades of RT-PMMA
Influence of Gamma-Irradiation on Swelling Percentage, Flammability Resistance and Morphological Analysis of EPDM/Sepiolite Composites
Chapter 2: Materials for Biomedical Application and Pharmacology
Porous NiTi Shape Memory Alloy Fabricated via Powder Metallurgy Technique Using Pore Forming Agent
Effect of Sintering Temperature on Hardness of Bioactive Glass/Cordierite
Characterizations of Calcium Oxide from Calcined Eggshell Waste
Effect of Soaking Time on the Compositional and Morphological Changes of DCPD-Coated ?-TCP Bioceramic
Synthesis and Characterization of Sol-Gel Derived Strontium Doped S53P4 Bioglass
Preliminary Study on the Bioactivity Properties of Cordierite/?-Wollastonite Biocomposite Ceramics
Effect of Calcium Salt Coating on Cordierite Powders on Bioactivity Properties
Extraction and Characterization of Natural Hydroxyapatite from Black Tilapia Fish Bone for Biomedical Applications
Characterization of the Halal Natural Hydroxyapatite Extract from Black Tilapia Fish Scale
Effect of Stirring Speed on the Formation and Characteristic of Alginate Microspheres via Gelation/ Emulsification Method
Fabrication and Characterization of Alginate/Iron (III) Oxide Beads and Biofilm for Biomedical Applications
Chapter 3: Ceramics
Influence of Feldspar Addition on the Properties of CaCu3Ti4O12 Ceramic
Effect of Pressure Load on the Physical Properties of ZTA-TiO2-Cr2O3
Comparative Study on the Wears of ZTA-TiO2-Cr2O3 Ceramic Cutting Tool and Commercial Ceramic Cutting Tool
The Effects of MWCNT Addition to Physical Properties of ZTA-MgO Cutting Tool
The Effect of Polyvinyl Alcohol Addition on the Solid Carbon Infusion in Zirconia-Toughened Alumina
Dielectric Properties of Low Concentration Barium Doped K0.5Na0.5NbO3 Lead Free Ceramics Prepared via Solid State Reaction Method
Densification of Zirconia Toughened Alumina Added CeO2 Ceramics via Hot Isostatic Press Sintering Technique
Compressive Strength of Zirconia-Toughened Alumina (ZTA) Foam with CaCO3 and CeO2 Addition via Polymeric Sponge Replication Technique
Development and Characterisation of Triaxial Electrical Porcelains from Malaysian Ceramic Minerals
Preparation of Porous Porcelain with Treated Flue Gas Desulfurization (FGD) Sludges the Foaming Agent
Chapter 4: Materials and Technologies for Opto- and Microelectronics
Optical and Structural Properties of Controlled pH Variation on Zinc Oxide Nanostructured via Hydrothermal Method
Light Absorption Enhancement Using Graphene Quantum Dots and the Effect of N-719 Dye Loading on the Photoelectrode of Dye-Sensitized Solar Cell (DSSC)
TiO2 Photoelectrode Band Gap Modification Using Carbon Quantum Dots (CQDs) for Dye-Sensitised Solar Cells (DSSCs)
Growth of Nanostructured Zinc Oxide on Flexible Conductive Substrate: A Review
Interfacial Reaction between SAC3807 Lead-Free Solders and Different Copper Substrate via Reflow Soldering Process
Physical and Electrochemical Properties of Graphene Decorated with ZnO Hollow Spheres for Supercapacitor Applications
Evaluation of Olivine LiFePO4 Polyanionic Cathode Material Using Density Functional Theory
The Effect of Oxygen and Air Flow on the Characteristic of Zinc Oxide ZnO Nanorods
Ionizers as Major ESD Countermeasure in 12nm Gate Oxide Semiconductor Manufacturing
Chapter 5: Functional Materials
Comparison of Stability Mechanism of Graphene Nanoparticles in Polyester Oil
Structural Behaviour and Electrical Properties of a Ball Milled MnCoGe Compounds
The Effect of Annealing Temperatures on the Phase Transition and Structural Properties of MnCoGe Compound
Influence of Annealing Temperatures on the Structural Behaviour and Electrical Properties of La(FeSi)13 Alloys
Electrical Properties and Raman Scattering of Palm Oil Based Carbon Nanotube
Fabrication and Characterization of Nickel Oxide Nanofibers by Electrospinning Technique
Chapter 6: Materials and Technologies in Environmental Engineering
Catalytic Oxidative Desulfurization of Model Diesel Using TBHP-DMF System
Identification of Nymphoides indica and Eichhornia crassipes as Potential Plants for the Phytoremediation of Batik Wastewater
Optimization Study of Malachite Green Dye Adsorption by Eggshell Using Response Surface Methodology
High Purity Nano-Silica from Rice Husk Ash (RHA) via Chemical Method as Additive/Stabilizing Agent for CO2 Capture Application
Adsorption Isotherm Analysis for CO2 Capture Using Barium Oxide Impregnated Iron(III) Oxide by Ultrasonic-Assisted Synthesis
Response Surface Methodology Optimization of Chemical Oxygen Demand Removal by Rice Husk Activated Carbon
Controlled Process of Radiation-Induced Grafting by Chemical Vapour Deposition for the Synthesis of Metal Adsorbent
Properties of Polyethersulfone Ultrafiltration Membrane by Incorporating Ionic Liquid for Humic Acid Removal
Comparative Study of Fe,N-TiO2 Photocatalysts under UV Light Irradiation
Physical Properties of ? Irradiated TiO2 Nanoparticles
Characterizations of High Entropy Alloy Powder as Catalyst Synthesized by Mechanical Alloying for Azo Dye Degradation
Chapter 7: Materials and Technologies of Chemical Production
A Study on the Catalytic Technology for Reduction of Naphthenic Acid Compound from Acidic Crude Oil
Fermentable Sugar via Diluted Acid Hydrolysis of Sugarcane Bagasse
Effect of Ferrite as Filler in Sugarcane Bagasse Paper via Irradiation Method
Effects of Sulphuric Acid and Speed Rotation on Hydrolysis of Bamboo Sawdust
Chapter 8: Structural Metals and Alloys
Phase Composition of Sintered AlCrFeNi
Morphological and Structural Properties of Sn-Bi Lead-Free Solder in 6 M Potassium Hydroxide
Simulation and Experimental of Crack Propagation in Automotive Engineering Component
Detection of Vibration Induced Fatigue Crack Propagation Using a Hybrid Method
Chapter 9: Mineral Processing and Metallurgy
Microwave-Assisted Acid Digestion of Malaysian Monazite for Determination of REEs Using ICP-MS
Utilization of Empty Fruit Bunch Derived Vapor for Carbon Deposition within Iron Ores
Malaysia's Rare Earth Element Story: Characterizing the "Amang"
Recovery of Light Rare Earth Elements (LREE) from Monazite by Alkaline Fusion
Extraction of Thorium Oxide (ThO2) from Malaysian Monazite through Alkali Digestion: Physical and Chemical Characterization Using X-Ray Analysis
Chapter 10: Laser Technologies
RSM Modeling and Validation of Glass Assisted Laser Micro Drilling of Silicon Wafer
RSM Modelling for Laser Cutting of Shore Wood to Replace Traditional Manufacturing Method
Chapter 11: Thin Films, Coatings and Surface Engineering
X-Ray Reflectivity Analysis in Evaluating Multilayer Thin Film Fabrication
Structural Analysis of DLC Thin Film Using X-Ray Reflectivity and Raman Spectroscopy Techniques
Evaluation of Reduced Graphene Oxide Film Using In-Plane XRD Measurement
Influence of Electrophoretic Deposition (EPD) Voltage on SOFC Interconnect Morphology
Effect of Spherical Tungsten Carbide Load to the Corrosion Behaviour of Plasma Transfer Arc Hard Facing in Acidic and Alkaline Environment
Green Synthesis of Nanostructured Zinc Oxide (ZnO) - Titanium Dioxide (TiO2) Thin Films
Corrosion Behavior of Antimony (Sb) Modified Galfan (Zn-Al) Coated Steel
pH Effect on Microbial Corrosion by Pseudomonas aeruginosa Sp. on Galvanized JIS3502 Steel
AlCrN Coated WC by PVD at Various Deposition Temperatures
Effect of Complexing Agent on The Morphology and Corrosion Effect of Cu-Sn-Zn Ternary Alloy via Electroplating
Tropical Climate Adaptation via Biomimicry and Surface Functionalization for Electronic Circuitry
The Mechanical Integrity of Self-Healing Coating Embedded with Microencapsulated Vegetable Oil
Chapter 12: Building Materials
Compressive Strength of Concrete Bricks with Recycled Concrete Sludge Waste
Influence of Modified Chemical Compositions on Palm Oil Fuel Ash to the Physico-Mechanical Properties of Porcelain
Study of Different Composition of Gypsum as Retarder in Ordinary Portland Cement
Interfacial Transition Zone (ITZ) Study of Concrete with Polyethylene Terephthalate (PET) Plastic
Study of Fly Ash Concrete Exposed to Elevated Temperature
Mechanical Enhancement of Composite Bricks Using Kenaf and Oil Palm Cellulose Nanofibrils
Effect of Adding Hydrogen Peroxide (H2O2) and Sodium Dodecyl Sulphate (SDS) to the Properties of Fly Ash (FA)-Based Geopolymer Mortar
Use of Municipal Solid Waste Incineration Bottom Ash and Rice Husk Ash as Blended Cement
Phase Transformation of FGD By-Product into Plaster Mould via Heat Treatment Process
Coal Power Plant Fly Ash Characterization Assessment for Geopolymerization Process

Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.

• Ciência dos materiais
• Outras tecnologias de produção
• Nanotecnologia

Adsorption;Alloy;Biomaterials;Cement;Ceramics;Coating;Composite;Concrete;Desulfurization;Dye Degradation;Geopolymer;Graphene;Laser Processing;Mechanical Properties;Metal Oxides;Metallurgy;Mineral Processing;Mortar;Nanomaterials;Optical Properties