Bio-Based Building Materials
portes grátis
Bio-Based Building Materials
Sonebi, Mohammed; Amziane, Sofiane
Trans Tech Publications Ltd
02/2022
902
Mole
Inglês
9783035726992
15 a 20 dias
1640
Descrição não disponível.
Preface
Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection
Experimental Investigation on Mechanical and Acoustic Performance of Miscanthus - Lime Composites
An Experimental Investigation on Suitability of Using Sisal Fibers in Reinforced Concrete Composites
Analyse of the Evolution of the Hygrothermal Properties of the Hemp-Based Mortar within the Framework of the Total Weathering Protocol
Thermal Insulation Blocks Made of Sunflower Pith Particles and Polysaccharide-Based Binders: Influence of Binder Type and Content on Their Characteristics
Effects of 0-30% Wood Ashes as a Substitute of Cement on the Strength of Concretes
Influence of High Temperatures on the Mechanical Properties of Wood Bio-Concretes
Environmental Performance of Wood Bioconcretes with Different Wood Shavings Treatments
Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete
Experimental Study on Restoration of Deteriorated Timber due to Termites by Resin Filling
Natural Fibers vs. Synthetic Fibers Reinforcement: Effect on Resistance of Mortars to Impact Loads
Effect of Natural and Polypropylene Fibers on early Age Cracking of Mortars
Mechanical Properties of Rammed Earth Stabilized with Local Waste and Recycled Materials
Life Cycle Assessment of Circular Bio-Based Construction
Water Sensitivity of Hemp-Foam Concrete
Seashells and Oyster Shells: Biobased Fine Aggregates in Concrete Mixtures
Experimental Analysis of the Behavior of Straw Biocomposite Exposed to High Temperature
Experimental Investigation of the Compatibility of Lime Coating with Insulation Straw Biocomposite
Assessment of the Influence of the Type of Filler Materials on the Properties of Cement Grouts
Comparative Study of Metakaolin and Zeolite Tuff Influence on Properties of High-Strength Concrete
Thermal and Moisture Buffering Properties of Novel Hemp-Lime Composites Integrated with Microencapsulated Phase Change Materials
Experimental and Numerical Study of Hygrothermal Behaviour of a Washing Fines Hemp Test Wall
Evaluation of Bio-Based Earth Engineered Mortars for Low Energy and Carbon Buildings in Tropical and Subtropical Climates
Physical, Thermal and Microstructural Characterization of Earth Mortars Stabilized with Incorporating Air Additive
First Step towards the Upscaling of the Production of Washing Fines - Hemp Composite. Study of Multiphysical Properties
Mechanical Compression and Crushing Properties of a Straw-Lime Material
Erosion Behaviour of Bio-Stabilised Earthen Materials
Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials
Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples
Evaluation of a Marine Dredged Sediment as Raw Material Compared to Volcanic Scoria for the Development of Lime-Pozzolan Eco-Binders
Earth-Based Mortars: Mix Design, Mechanical Characterization and Environmental Performance Assessment
How can a Climate-Neutral Building Look Like?
How Reliable is the Thermal Conductivity of Biobased Building Insulating Materials Measured with Hot Disk Device?
An Experimental Study on Clay and Sand Mixes to Develop a Non-Linear Homogenized Model for Earth Construction Materials
Research for Substantiation to Upscale Bio-Based Materials in the Construction Industry
Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design
Mechanical Properties and Fracture Energy of Concrete Beams Reinforced with Basalt Fibres
Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC
Properties of Phragmites australis for Insulating Concrete Application
Self-Desiccation of a Vernacular CSA Binder
Experimental Out-of-Plane Behaviour of a Rammed Earth Sub-Assemblage Subjected to Seismic Inputs
Customising Microstructural and Mineralogical Characteristics of Hydrated Lime Using Biopolymers
Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes
Comparison of Numerical HMT Codes to Simulate MBV Test of Hemp-Earth Composites
Water Stabilization of Clay Bricks with Improved Tannin and Iron Mixes
Tackling Variability of Clay to Provide a Robust Binder
Microstructural Characterization of Prefabricated Hempcrete Blocks
Reflections on the Environmental Impact of 'Vegetarian' Buildings, and on the Reliability of Databases
Effect of Plant Fibres on the Variability of Cob Materials
Improved Magnesium Cement for Durable Hemp Composite Boards
Micro-Macro Modelling Approach of Vegetal Wools Thermal Conductivity
Development of GHG Emissions Curves for Bio-Concretes Specification: Case Study for Bamboo, Rice Husk, and Wood Shavings Considering the Context of Different Countries
Life Cycle Assessment of a Wall Made of Prefabricated Hempcrete Blocks
Starch Reinforcement of Raw Earth Constructions
Successful Circular Bio-Based Construction Initiatives: Five Essentials from Case Studies
Construction Field Monitoring of a COB Prototype Building
Earth Plastered Wall Heating as a Low-Emitting, Cost-Effective and Robust Energy System for Building Renovation
Substitution of Synthetic Fibers by Bio-Based Fibers in a Structural Mortar
Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes
Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete
?-Cyclodextrin Substituted Polyoxyethylene in the Synthesize of Polycarboxylate Superplasticizers
Efficiency of Bio-Sourced Composites in Confining Recycled Aggregates Concrete
Recovery of Excavated Materials as an Alternative Solution to Earth Building Materials
Overcoming the Perceptual Gap: Worldwide Perceived Comfort Survey of Earthen Building Experts and Homeowners
Biological Stabilisers in Earthen Construction: A Mechanistic Understanding of their Response to Water-Ingress
What Makes Cow-Dung Stabilised Earthen Block Water-Resistant
Influence of the Variability of Limestone and Fly Ash on the Setting and Mechanical Properties of a Moroccan Composite Cement
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste
Contribution on the Use of Household Waste as Bio-Admixture
Traditional Gypsum Pavements with Natural Aditives
A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres
Risk for Mould Growth on Hemp-Lime at Different Relative Humidity
Organic Brick
Plant Biomass Used for Green Concrete: A Review of Treatment Methods
Variability Assessment of the Compressive and Tensile Strength of Fibred Earthen Composites
Synthesis of the Current Knowledge Concerning the Construction of French Traditional Cob Building for Giving Recommendations
Hygrothermal Behaviour of Air Lime Coatings with Mussel Shell Sand
Evaluation of GHG Emissions from the Production of Cross-Laminated Timber (CLT): Analysis of Different Life Cycle Inventories
Physical Properties and Hygrothermal Behavior of Mycelium-Based Composites as Foam-Like Wall Insulation Material
Mycelium Composites and their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil
Performance of Alfa Fibres in Cementitious Materials Exposed to Diverse Surface Treatments
Stabilization of Dicalcium Silicate-Zn Composite Approaching Layered Double Hydroxide Structure for Bioactive Cement Applications
Reed as a Thermal Insulation Material: Experimental Characterisation of the Physical and Thermal Properties
Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork
Physico-Chemical Characterization of the Electric Arc Furnace Slag (EAFS) of the Sonasid-Jorf Steelworks - Morocco
Hydro-Mechanics Coupling on Rammed Earth Material: Drying Experiment at Structural Scale
Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks
Impact of Biobased Surfactants on Hygrothermal Behaviour of Gypsum Foams
Flexural Behavior of Six Species of Italian Bamboo
Shear Behavior of Bamboo Reinforced Concrete Beams
Improving Performance of Thermal Modified Wood against Termites with Bicine and Tricine
3D Modelling of Hydric Transfers in Spruce Wood with Consideration of Sorption Hysteresis
Development of Animal Fibres Composites for Construction Applications
Use of Hemp Fibres in 3D Printed Concrete
Effect of the Treatments of the Surface on Mechanical Performance of Concrete Containing Chemical Admixtures
Development of Airlaid Non-Woven Panels for Building's Thermal Insulation
Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation
Fire Behavior of Raw Earth Bricks: Influence of Water Content and Cement Stabilization
Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites
Straw Material: End-of-Life Cycle Analysis Scenario
Influence of Fibre Treatment and Matrix Modification on Mechanical Properties of Flax Fibre Reinforced Mortars after Freeze/Thaw Cycles
Mortar to Repair Rammed-Earth Walls' Surfaces: Do we still Need it?
Durability of Bamboo Bio-Concretes Exposed to Natural Aging
Flax Fibers Composite Made up by 3D Printing
Experimental Investigation on Evaporation Rate for Enhancing Evaporative Cooling of Pervious Pavement Containing Recycled Rubber
A Model for Assessment of Heat and Moisture Transfer Hollow a Hemp Concerte Wall Using Finite Element Method
Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer
Compatibility of Plants with a Mineral Binder
Bamboo Connection Technology for Lightweight Structures
Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection
Experimental Investigation on Mechanical and Acoustic Performance of Miscanthus - Lime Composites
An Experimental Investigation on Suitability of Using Sisal Fibers in Reinforced Concrete Composites
Analyse of the Evolution of the Hygrothermal Properties of the Hemp-Based Mortar within the Framework of the Total Weathering Protocol
Thermal Insulation Blocks Made of Sunflower Pith Particles and Polysaccharide-Based Binders: Influence of Binder Type and Content on Their Characteristics
Effects of 0-30% Wood Ashes as a Substitute of Cement on the Strength of Concretes
Influence of High Temperatures on the Mechanical Properties of Wood Bio-Concretes
Environmental Performance of Wood Bioconcretes with Different Wood Shavings Treatments
Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete
Experimental Study on Restoration of Deteriorated Timber due to Termites by Resin Filling
Natural Fibers vs. Synthetic Fibers Reinforcement: Effect on Resistance of Mortars to Impact Loads
Effect of Natural and Polypropylene Fibers on early Age Cracking of Mortars
Mechanical Properties of Rammed Earth Stabilized with Local Waste and Recycled Materials
Life Cycle Assessment of Circular Bio-Based Construction
Water Sensitivity of Hemp-Foam Concrete
Seashells and Oyster Shells: Biobased Fine Aggregates in Concrete Mixtures
Experimental Analysis of the Behavior of Straw Biocomposite Exposed to High Temperature
Experimental Investigation of the Compatibility of Lime Coating with Insulation Straw Biocomposite
Assessment of the Influence of the Type of Filler Materials on the Properties of Cement Grouts
Comparative Study of Metakaolin and Zeolite Tuff Influence on Properties of High-Strength Concrete
Thermal and Moisture Buffering Properties of Novel Hemp-Lime Composites Integrated with Microencapsulated Phase Change Materials
Experimental and Numerical Study of Hygrothermal Behaviour of a Washing Fines Hemp Test Wall
Evaluation of Bio-Based Earth Engineered Mortars for Low Energy and Carbon Buildings in Tropical and Subtropical Climates
Physical, Thermal and Microstructural Characterization of Earth Mortars Stabilized with Incorporating Air Additive
First Step towards the Upscaling of the Production of Washing Fines - Hemp Composite. Study of Multiphysical Properties
Mechanical Compression and Crushing Properties of a Straw-Lime Material
Erosion Behaviour of Bio-Stabilised Earthen Materials
Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials
Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples
Evaluation of a Marine Dredged Sediment as Raw Material Compared to Volcanic Scoria for the Development of Lime-Pozzolan Eco-Binders
Earth-Based Mortars: Mix Design, Mechanical Characterization and Environmental Performance Assessment
How can a Climate-Neutral Building Look Like?
How Reliable is the Thermal Conductivity of Biobased Building Insulating Materials Measured with Hot Disk Device?
An Experimental Study on Clay and Sand Mixes to Develop a Non-Linear Homogenized Model for Earth Construction Materials
Research for Substantiation to Upscale Bio-Based Materials in the Construction Industry
Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design
Mechanical Properties and Fracture Energy of Concrete Beams Reinforced with Basalt Fibres
Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC
Properties of Phragmites australis for Insulating Concrete Application
Self-Desiccation of a Vernacular CSA Binder
Experimental Out-of-Plane Behaviour of a Rammed Earth Sub-Assemblage Subjected to Seismic Inputs
Customising Microstructural and Mineralogical Characteristics of Hydrated Lime Using Biopolymers
Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes
Comparison of Numerical HMT Codes to Simulate MBV Test of Hemp-Earth Composites
Water Stabilization of Clay Bricks with Improved Tannin and Iron Mixes
Tackling Variability of Clay to Provide a Robust Binder
Microstructural Characterization of Prefabricated Hempcrete Blocks
Reflections on the Environmental Impact of 'Vegetarian' Buildings, and on the Reliability of Databases
Effect of Plant Fibres on the Variability of Cob Materials
Improved Magnesium Cement for Durable Hemp Composite Boards
Micro-Macro Modelling Approach of Vegetal Wools Thermal Conductivity
Development of GHG Emissions Curves for Bio-Concretes Specification: Case Study for Bamboo, Rice Husk, and Wood Shavings Considering the Context of Different Countries
Life Cycle Assessment of a Wall Made of Prefabricated Hempcrete Blocks
Starch Reinforcement of Raw Earth Constructions
Successful Circular Bio-Based Construction Initiatives: Five Essentials from Case Studies
Construction Field Monitoring of a COB Prototype Building
Earth Plastered Wall Heating as a Low-Emitting, Cost-Effective and Robust Energy System for Building Renovation
Substitution of Synthetic Fibers by Bio-Based Fibers in a Structural Mortar
Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes
Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete
?-Cyclodextrin Substituted Polyoxyethylene in the Synthesize of Polycarboxylate Superplasticizers
Efficiency of Bio-Sourced Composites in Confining Recycled Aggregates Concrete
Recovery of Excavated Materials as an Alternative Solution to Earth Building Materials
Overcoming the Perceptual Gap: Worldwide Perceived Comfort Survey of Earthen Building Experts and Homeowners
Biological Stabilisers in Earthen Construction: A Mechanistic Understanding of their Response to Water-Ingress
What Makes Cow-Dung Stabilised Earthen Block Water-Resistant
Influence of the Variability of Limestone and Fly Ash on the Setting and Mechanical Properties of a Moroccan Composite Cement
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste
Contribution on the Use of Household Waste as Bio-Admixture
Traditional Gypsum Pavements with Natural Aditives
A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres
Risk for Mould Growth on Hemp-Lime at Different Relative Humidity
Organic Brick
Plant Biomass Used for Green Concrete: A Review of Treatment Methods
Variability Assessment of the Compressive and Tensile Strength of Fibred Earthen Composites
Synthesis of the Current Knowledge Concerning the Construction of French Traditional Cob Building for Giving Recommendations
Hygrothermal Behaviour of Air Lime Coatings with Mussel Shell Sand
Evaluation of GHG Emissions from the Production of Cross-Laminated Timber (CLT): Analysis of Different Life Cycle Inventories
Physical Properties and Hygrothermal Behavior of Mycelium-Based Composites as Foam-Like Wall Insulation Material
Mycelium Composites and their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil
Performance of Alfa Fibres in Cementitious Materials Exposed to Diverse Surface Treatments
Stabilization of Dicalcium Silicate-Zn Composite Approaching Layered Double Hydroxide Structure for Bioactive Cement Applications
Reed as a Thermal Insulation Material: Experimental Characterisation of the Physical and Thermal Properties
Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork
Physico-Chemical Characterization of the Electric Arc Furnace Slag (EAFS) of the Sonasid-Jorf Steelworks - Morocco
Hydro-Mechanics Coupling on Rammed Earth Material: Drying Experiment at Structural Scale
Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks
Impact of Biobased Surfactants on Hygrothermal Behaviour of Gypsum Foams
Flexural Behavior of Six Species of Italian Bamboo
Shear Behavior of Bamboo Reinforced Concrete Beams
Improving Performance of Thermal Modified Wood against Termites with Bicine and Tricine
3D Modelling of Hydric Transfers in Spruce Wood with Consideration of Sorption Hysteresis
Development of Animal Fibres Composites for Construction Applications
Use of Hemp Fibres in 3D Printed Concrete
Effect of the Treatments of the Surface on Mechanical Performance of Concrete Containing Chemical Admixtures
Development of Airlaid Non-Woven Panels for Building's Thermal Insulation
Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation
Fire Behavior of Raw Earth Bricks: Influence of Water Content and Cement Stabilization
Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites
Straw Material: End-of-Life Cycle Analysis Scenario
Influence of Fibre Treatment and Matrix Modification on Mechanical Properties of Flax Fibre Reinforced Mortars after Freeze/Thaw Cycles
Mortar to Repair Rammed-Earth Walls' Surfaces: Do we still Need it?
Durability of Bamboo Bio-Concretes Exposed to Natural Aging
Flax Fibers Composite Made up by 3D Printing
Experimental Investigation on Evaporation Rate for Enhancing Evaporative Cooling of Pervious Pavement Containing Recycled Rubber
A Model for Assessment of Heat and Moisture Transfer Hollow a Hemp Concerte Wall Using Finite Element Method
Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer
Compatibility of Plants with a Mineral Binder
Bamboo Connection Technology for Lightweight Structures
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Adobe;Bamboo;Basalt;Binder;Bioactive Cement;Bio-Based Composite;Biological Stabiliser;Biopolymer;Building Materials;Clay;Cob;Concrete;Cork;Earth Plaster;Green Concrete;Gypsum;Hemp Fiber;Hempcrete Block;Life Cycle Assessment;Limestone;Linseed Oil
Preface
Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection
Experimental Investigation on Mechanical and Acoustic Performance of Miscanthus - Lime Composites
An Experimental Investigation on Suitability of Using Sisal Fibers in Reinforced Concrete Composites
Analyse of the Evolution of the Hygrothermal Properties of the Hemp-Based Mortar within the Framework of the Total Weathering Protocol
Thermal Insulation Blocks Made of Sunflower Pith Particles and Polysaccharide-Based Binders: Influence of Binder Type and Content on Their Characteristics
Effects of 0-30% Wood Ashes as a Substitute of Cement on the Strength of Concretes
Influence of High Temperatures on the Mechanical Properties of Wood Bio-Concretes
Environmental Performance of Wood Bioconcretes with Different Wood Shavings Treatments
Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete
Experimental Study on Restoration of Deteriorated Timber due to Termites by Resin Filling
Natural Fibers vs. Synthetic Fibers Reinforcement: Effect on Resistance of Mortars to Impact Loads
Effect of Natural and Polypropylene Fibers on early Age Cracking of Mortars
Mechanical Properties of Rammed Earth Stabilized with Local Waste and Recycled Materials
Life Cycle Assessment of Circular Bio-Based Construction
Water Sensitivity of Hemp-Foam Concrete
Seashells and Oyster Shells: Biobased Fine Aggregates in Concrete Mixtures
Experimental Analysis of the Behavior of Straw Biocomposite Exposed to High Temperature
Experimental Investigation of the Compatibility of Lime Coating with Insulation Straw Biocomposite
Assessment of the Influence of the Type of Filler Materials on the Properties of Cement Grouts
Comparative Study of Metakaolin and Zeolite Tuff Influence on Properties of High-Strength Concrete
Thermal and Moisture Buffering Properties of Novel Hemp-Lime Composites Integrated with Microencapsulated Phase Change Materials
Experimental and Numerical Study of Hygrothermal Behaviour of a Washing Fines Hemp Test Wall
Evaluation of Bio-Based Earth Engineered Mortars for Low Energy and Carbon Buildings in Tropical and Subtropical Climates
Physical, Thermal and Microstructural Characterization of Earth Mortars Stabilized with Incorporating Air Additive
First Step towards the Upscaling of the Production of Washing Fines - Hemp Composite. Study of Multiphysical Properties
Mechanical Compression and Crushing Properties of a Straw-Lime Material
Erosion Behaviour of Bio-Stabilised Earthen Materials
Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials
Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples
Evaluation of a Marine Dredged Sediment as Raw Material Compared to Volcanic Scoria for the Development of Lime-Pozzolan Eco-Binders
Earth-Based Mortars: Mix Design, Mechanical Characterization and Environmental Performance Assessment
How can a Climate-Neutral Building Look Like?
How Reliable is the Thermal Conductivity of Biobased Building Insulating Materials Measured with Hot Disk Device?
An Experimental Study on Clay and Sand Mixes to Develop a Non-Linear Homogenized Model for Earth Construction Materials
Research for Substantiation to Upscale Bio-Based Materials in the Construction Industry
Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design
Mechanical Properties and Fracture Energy of Concrete Beams Reinforced with Basalt Fibres
Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC
Properties of Phragmites australis for Insulating Concrete Application
Self-Desiccation of a Vernacular CSA Binder
Experimental Out-of-Plane Behaviour of a Rammed Earth Sub-Assemblage Subjected to Seismic Inputs
Customising Microstructural and Mineralogical Characteristics of Hydrated Lime Using Biopolymers
Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes
Comparison of Numerical HMT Codes to Simulate MBV Test of Hemp-Earth Composites
Water Stabilization of Clay Bricks with Improved Tannin and Iron Mixes
Tackling Variability of Clay to Provide a Robust Binder
Microstructural Characterization of Prefabricated Hempcrete Blocks
Reflections on the Environmental Impact of 'Vegetarian' Buildings, and on the Reliability of Databases
Effect of Plant Fibres on the Variability of Cob Materials
Improved Magnesium Cement for Durable Hemp Composite Boards
Micro-Macro Modelling Approach of Vegetal Wools Thermal Conductivity
Development of GHG Emissions Curves for Bio-Concretes Specification: Case Study for Bamboo, Rice Husk, and Wood Shavings Considering the Context of Different Countries
Life Cycle Assessment of a Wall Made of Prefabricated Hempcrete Blocks
Starch Reinforcement of Raw Earth Constructions
Successful Circular Bio-Based Construction Initiatives: Five Essentials from Case Studies
Construction Field Monitoring of a COB Prototype Building
Earth Plastered Wall Heating as a Low-Emitting, Cost-Effective and Robust Energy System for Building Renovation
Substitution of Synthetic Fibers by Bio-Based Fibers in a Structural Mortar
Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes
Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete
?-Cyclodextrin Substituted Polyoxyethylene in the Synthesize of Polycarboxylate Superplasticizers
Efficiency of Bio-Sourced Composites in Confining Recycled Aggregates Concrete
Recovery of Excavated Materials as an Alternative Solution to Earth Building Materials
Overcoming the Perceptual Gap: Worldwide Perceived Comfort Survey of Earthen Building Experts and Homeowners
Biological Stabilisers in Earthen Construction: A Mechanistic Understanding of their Response to Water-Ingress
What Makes Cow-Dung Stabilised Earthen Block Water-Resistant
Influence of the Variability of Limestone and Fly Ash on the Setting and Mechanical Properties of a Moroccan Composite Cement
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste
Contribution on the Use of Household Waste as Bio-Admixture
Traditional Gypsum Pavements with Natural Aditives
A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres
Risk for Mould Growth on Hemp-Lime at Different Relative Humidity
Organic Brick
Plant Biomass Used for Green Concrete: A Review of Treatment Methods
Variability Assessment of the Compressive and Tensile Strength of Fibred Earthen Composites
Synthesis of the Current Knowledge Concerning the Construction of French Traditional Cob Building for Giving Recommendations
Hygrothermal Behaviour of Air Lime Coatings with Mussel Shell Sand
Evaluation of GHG Emissions from the Production of Cross-Laminated Timber (CLT): Analysis of Different Life Cycle Inventories
Physical Properties and Hygrothermal Behavior of Mycelium-Based Composites as Foam-Like Wall Insulation Material
Mycelium Composites and their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil
Performance of Alfa Fibres in Cementitious Materials Exposed to Diverse Surface Treatments
Stabilization of Dicalcium Silicate-Zn Composite Approaching Layered Double Hydroxide Structure for Bioactive Cement Applications
Reed as a Thermal Insulation Material: Experimental Characterisation of the Physical and Thermal Properties
Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork
Physico-Chemical Characterization of the Electric Arc Furnace Slag (EAFS) of the Sonasid-Jorf Steelworks - Morocco
Hydro-Mechanics Coupling on Rammed Earth Material: Drying Experiment at Structural Scale
Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks
Impact of Biobased Surfactants on Hygrothermal Behaviour of Gypsum Foams
Flexural Behavior of Six Species of Italian Bamboo
Shear Behavior of Bamboo Reinforced Concrete Beams
Improving Performance of Thermal Modified Wood against Termites with Bicine and Tricine
3D Modelling of Hydric Transfers in Spruce Wood with Consideration of Sorption Hysteresis
Development of Animal Fibres Composites for Construction Applications
Use of Hemp Fibres in 3D Printed Concrete
Effect of the Treatments of the Surface on Mechanical Performance of Concrete Containing Chemical Admixtures
Development of Airlaid Non-Woven Panels for Building's Thermal Insulation
Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation
Fire Behavior of Raw Earth Bricks: Influence of Water Content and Cement Stabilization
Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites
Straw Material: End-of-Life Cycle Analysis Scenario
Influence of Fibre Treatment and Matrix Modification on Mechanical Properties of Flax Fibre Reinforced Mortars after Freeze/Thaw Cycles
Mortar to Repair Rammed-Earth Walls' Surfaces: Do we still Need it?
Durability of Bamboo Bio-Concretes Exposed to Natural Aging
Flax Fibers Composite Made up by 3D Printing
Experimental Investigation on Evaporation Rate for Enhancing Evaporative Cooling of Pervious Pavement Containing Recycled Rubber
A Model for Assessment of Heat and Moisture Transfer Hollow a Hemp Concerte Wall Using Finite Element Method
Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer
Compatibility of Plants with a Mineral Binder
Bamboo Connection Technology for Lightweight Structures
Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection
Experimental Investigation on Mechanical and Acoustic Performance of Miscanthus - Lime Composites
An Experimental Investigation on Suitability of Using Sisal Fibers in Reinforced Concrete Composites
Analyse of the Evolution of the Hygrothermal Properties of the Hemp-Based Mortar within the Framework of the Total Weathering Protocol
Thermal Insulation Blocks Made of Sunflower Pith Particles and Polysaccharide-Based Binders: Influence of Binder Type and Content on Their Characteristics
Effects of 0-30% Wood Ashes as a Substitute of Cement on the Strength of Concretes
Influence of High Temperatures on the Mechanical Properties of Wood Bio-Concretes
Environmental Performance of Wood Bioconcretes with Different Wood Shavings Treatments
Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete
Experimental Study on Restoration of Deteriorated Timber due to Termites by Resin Filling
Natural Fibers vs. Synthetic Fibers Reinforcement: Effect on Resistance of Mortars to Impact Loads
Effect of Natural and Polypropylene Fibers on early Age Cracking of Mortars
Mechanical Properties of Rammed Earth Stabilized with Local Waste and Recycled Materials
Life Cycle Assessment of Circular Bio-Based Construction
Water Sensitivity of Hemp-Foam Concrete
Seashells and Oyster Shells: Biobased Fine Aggregates in Concrete Mixtures
Experimental Analysis of the Behavior of Straw Biocomposite Exposed to High Temperature
Experimental Investigation of the Compatibility of Lime Coating with Insulation Straw Biocomposite
Assessment of the Influence of the Type of Filler Materials on the Properties of Cement Grouts
Comparative Study of Metakaolin and Zeolite Tuff Influence on Properties of High-Strength Concrete
Thermal and Moisture Buffering Properties of Novel Hemp-Lime Composites Integrated with Microencapsulated Phase Change Materials
Experimental and Numerical Study of Hygrothermal Behaviour of a Washing Fines Hemp Test Wall
Evaluation of Bio-Based Earth Engineered Mortars for Low Energy and Carbon Buildings in Tropical and Subtropical Climates
Physical, Thermal and Microstructural Characterization of Earth Mortars Stabilized with Incorporating Air Additive
First Step towards the Upscaling of the Production of Washing Fines - Hemp Composite. Study of Multiphysical Properties
Mechanical Compression and Crushing Properties of a Straw-Lime Material
Erosion Behaviour of Bio-Stabilised Earthen Materials
Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials
Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples
Evaluation of a Marine Dredged Sediment as Raw Material Compared to Volcanic Scoria for the Development of Lime-Pozzolan Eco-Binders
Earth-Based Mortars: Mix Design, Mechanical Characterization and Environmental Performance Assessment
How can a Climate-Neutral Building Look Like?
How Reliable is the Thermal Conductivity of Biobased Building Insulating Materials Measured with Hot Disk Device?
An Experimental Study on Clay and Sand Mixes to Develop a Non-Linear Homogenized Model for Earth Construction Materials
Research for Substantiation to Upscale Bio-Based Materials in the Construction Industry
Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design
Mechanical Properties and Fracture Energy of Concrete Beams Reinforced with Basalt Fibres
Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC
Properties of Phragmites australis for Insulating Concrete Application
Self-Desiccation of a Vernacular CSA Binder
Experimental Out-of-Plane Behaviour of a Rammed Earth Sub-Assemblage Subjected to Seismic Inputs
Customising Microstructural and Mineralogical Characteristics of Hydrated Lime Using Biopolymers
Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes
Comparison of Numerical HMT Codes to Simulate MBV Test of Hemp-Earth Composites
Water Stabilization of Clay Bricks with Improved Tannin and Iron Mixes
Tackling Variability of Clay to Provide a Robust Binder
Microstructural Characterization of Prefabricated Hempcrete Blocks
Reflections on the Environmental Impact of 'Vegetarian' Buildings, and on the Reliability of Databases
Effect of Plant Fibres on the Variability of Cob Materials
Improved Magnesium Cement for Durable Hemp Composite Boards
Micro-Macro Modelling Approach of Vegetal Wools Thermal Conductivity
Development of GHG Emissions Curves for Bio-Concretes Specification: Case Study for Bamboo, Rice Husk, and Wood Shavings Considering the Context of Different Countries
Life Cycle Assessment of a Wall Made of Prefabricated Hempcrete Blocks
Starch Reinforcement of Raw Earth Constructions
Successful Circular Bio-Based Construction Initiatives: Five Essentials from Case Studies
Construction Field Monitoring of a COB Prototype Building
Earth Plastered Wall Heating as a Low-Emitting, Cost-Effective and Robust Energy System for Building Renovation
Substitution of Synthetic Fibers by Bio-Based Fibers in a Structural Mortar
Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes
Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete
?-Cyclodextrin Substituted Polyoxyethylene in the Synthesize of Polycarboxylate Superplasticizers
Efficiency of Bio-Sourced Composites in Confining Recycled Aggregates Concrete
Recovery of Excavated Materials as an Alternative Solution to Earth Building Materials
Overcoming the Perceptual Gap: Worldwide Perceived Comfort Survey of Earthen Building Experts and Homeowners
Biological Stabilisers in Earthen Construction: A Mechanistic Understanding of their Response to Water-Ingress
What Makes Cow-Dung Stabilised Earthen Block Water-Resistant
Influence of the Variability of Limestone and Fly Ash on the Setting and Mechanical Properties of a Moroccan Composite Cement
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste
Contribution on the Use of Household Waste as Bio-Admixture
Traditional Gypsum Pavements with Natural Aditives
A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres
Risk for Mould Growth on Hemp-Lime at Different Relative Humidity
Organic Brick
Plant Biomass Used for Green Concrete: A Review of Treatment Methods
Variability Assessment of the Compressive and Tensile Strength of Fibred Earthen Composites
Synthesis of the Current Knowledge Concerning the Construction of French Traditional Cob Building for Giving Recommendations
Hygrothermal Behaviour of Air Lime Coatings with Mussel Shell Sand
Evaluation of GHG Emissions from the Production of Cross-Laminated Timber (CLT): Analysis of Different Life Cycle Inventories
Physical Properties and Hygrothermal Behavior of Mycelium-Based Composites as Foam-Like Wall Insulation Material
Mycelium Composites and their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil
Performance of Alfa Fibres in Cementitious Materials Exposed to Diverse Surface Treatments
Stabilization of Dicalcium Silicate-Zn Composite Approaching Layered Double Hydroxide Structure for Bioactive Cement Applications
Reed as a Thermal Insulation Material: Experimental Characterisation of the Physical and Thermal Properties
Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork
Physico-Chemical Characterization of the Electric Arc Furnace Slag (EAFS) of the Sonasid-Jorf Steelworks - Morocco
Hydro-Mechanics Coupling on Rammed Earth Material: Drying Experiment at Structural Scale
Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks
Impact of Biobased Surfactants on Hygrothermal Behaviour of Gypsum Foams
Flexural Behavior of Six Species of Italian Bamboo
Shear Behavior of Bamboo Reinforced Concrete Beams
Improving Performance of Thermal Modified Wood against Termites with Bicine and Tricine
3D Modelling of Hydric Transfers in Spruce Wood with Consideration of Sorption Hysteresis
Development of Animal Fibres Composites for Construction Applications
Use of Hemp Fibres in 3D Printed Concrete
Effect of the Treatments of the Surface on Mechanical Performance of Concrete Containing Chemical Admixtures
Development of Airlaid Non-Woven Panels for Building's Thermal Insulation
Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation
Fire Behavior of Raw Earth Bricks: Influence of Water Content and Cement Stabilization
Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites
Straw Material: End-of-Life Cycle Analysis Scenario
Influence of Fibre Treatment and Matrix Modification on Mechanical Properties of Flax Fibre Reinforced Mortars after Freeze/Thaw Cycles
Mortar to Repair Rammed-Earth Walls' Surfaces: Do we still Need it?
Durability of Bamboo Bio-Concretes Exposed to Natural Aging
Flax Fibers Composite Made up by 3D Printing
Experimental Investigation on Evaporation Rate for Enhancing Evaporative Cooling of Pervious Pavement Containing Recycled Rubber
A Model for Assessment of Heat and Moisture Transfer Hollow a Hemp Concerte Wall Using Finite Element Method
Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer
Compatibility of Plants with a Mineral Binder
Bamboo Connection Technology for Lightweight Structures
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
